|
Thanks to everyone who responded. The problem turned out to be the printer. We tried printing to another Epson DFX5000 and it worked perfectly. Eric Kempter Director of MIS Commair Mechanical Services -----Original Message----- From: Omprakash Maniyar [SMTP:OManiyar@starbucks.com] Sent: Thursday, April 30, 1998 3:16 PM To: 'MIDRANGE-L@midrange.com' Subject: RE: TCP/IP printing problem we in addition specify AUTOSTRWTR(1) SEPPAGE(*NO).. If you don't specify the AUTOSTRWTR then you have to do STRRMTWTR to actually start it.. Om @Ext 4774 > -----Original Message----- > From: Marc Zylka [SMTP:mzylka@netpath.net] > Sent: Saturday, April 25, 1998 5:33 PM > To: MIDRANGE-L@midrange.com > Subject: Re: TCP/IP printing problem > > Eric, > > >I am attempting to connect an Epson DXF5000 printer via a HP Jet > Direct EX > >card to the AS/400 version 4.1 - 620 e-series. I have created the > >following outq description: > > We're running on a 620 at V4R1 and I've set up printing to a Jet > Direct card using the following parameters in the output queue > definition: > > Remote system: *INTNETADR > Remote printer queue: *NONE > Connection type: *IP > Internet address: xxx.xxx.xxx.xxx > Destination type: *OTHER > Host print transform: *YES > Manufacturer type and model: should be fine as you have it > > I did not set up the IP address in the Host Table Entry and it works > fine as defined above. > > > >Also, we have found that we can not connect to our RISC system using > >NSRouter. We can connect via TCP/IP. > > > Don't know about this one. Ours works fine with NS/Router, we use > NetSoft Elite using Direct TCP/IP or Anynet. > > Marc ( mzylka@netpath.net ) > > > > +--- > | This is the Midrange System Mailing List! > | To submit a new message, send your mail to MIDRANGE-L@midrange.com. > | To unsubscribe from this list send email to > MIDRANGE-L-UNSUB@midrange.com. > | Questions should be directed to the list owner/operator: > david@midrange.com > +--- +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +--- +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.