We are trying to setup a Lexmark MarkNet Pro1 to provide an IPconnection to our Lan for printing fr

We are trying to setup a Lexmark MarkNet Pro1 to provide an IP connection to 
our Lan for printing from
the 400.
Command Used:
CrtDevPrt  Devd(PIT1) DevCls(*Lan) Type(3812) Model(1) LanAttach(*IP) 
AdptType(*External)
AdptCnnTyp(*Parallel) Port(0) Font(011) Parity(*None) StopBits(1) 
Transform(*Yes)
MfrTypMdl(*IBM4039HP) RmtLocName('10.10.1.81') SysDrvPgm("*IBMPJLDRV) Text('IT 
Department')

Error Received:
CPD8FDC 
Message: Adapter type or adapter connection type not valid.
Cause: When the remote location name (RMTLOCNAME parm) is specified and LAN 
attachment
(LANATTCH pamr) is *IP or *USRDFN, the adapter type (ADPTTYPE parm) must be 
*INTERNAL and
the adapter connection type (ADPTCNNTYP parm) must be *PARALLEL.

Is there some PTF that we need to make this work. We were planning on using the 
Lexmark boxes to
attach our IBM 4029 and 4039 printers to our Lan and Wan and print over IP. We 
are at V3r7.

TIA

Cyndi Bradberry
Programmer
IHFA, Boise ID
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---