Re: TCP/IP Problems

You are using an FSIOP, so your resource name must be *NWSD.
You must have already created a Network Server Description via CRTNWSD.
If you need more specifics please reply
 privately.                                                                     

 
privately. 

On Fri, 11 Jul 1997 HankHeath@aol.com wrote:

> I know I did something foolish, but I can't find out what.
> 
> When starting up TCP/IP on my V3R2 AS/400, I get a QSYSOPR error message:
> 
> "Line ETHTCP vary on failed.
> 
> "Cause . . .: A configuration error was found by the system. The vary on
> failed. The reason code is 0000200E."
> :
> "0000200E: Protocol conflict between IOA and line description ETHTCP."
> :
> "Recovery . . .:"
> :
> "0000200E: Using the appropriate change line description command, change the
> resource name in line descrition ETHTCP to correspond to a post that matches
> the protocol of line description ETHTCP."
> 
> My line description is for ETHTCP is:
> 
> "Line description         ETHTCP
>  Option                       *BASIC
>  Category of line          *ELAN
>  Resource name          LIN051
>  Online at IPL              *YES
>  Vary on wait               *NOWAIT
>  Network controller       ETHTCNET     [created by STRTCP]
>  Local adapter address *ADPT
>  Exchange identifier      056BF2FA
>  Maximum controllers   40
>  Error threshold level     *OFF"
> 
> The hardware resource is:
> 
> Resource Type Text
> CC03       6616 File Server IOP
>  LIN05      6181 Comm Adapter
>   LIN051   6181 Ethernet Adapter
>  LIN06      6B00 Virtual Adapter
>   LIN061   6B00 Virtual Adapter
> 
> 
> 
> Does anyone have a clue what I did?
> 
> Hank Heath
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This is the Midrange System Mailing List!  To submit a new message,   *
> * send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
> * this list send email to MAJORDOMO@midrange.com and specify            *
> * 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
> * should be directed to the list owner / operator: david@midrange.com   *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> umidr
> 
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *