Re: Remote connectivity

[Carl Galgano <cgalgano@xxxxxxxxxxxxxxxxx>]

You can easily accomplish this if your have an ASCII workstation controller
on your system.  The AWSC support many of the terminal type emulations that
are in Procomm or PCAnywhere.  We have had good sucess using VT100 in the
past.  If your use an AWSC be sure you get the right cable pin out.  It a
25M to 25M set up as a serial null modem.  I have the pinout handy if you
need it.
Carl


At 09:47 AM 6/11/97 -0700, ekempter@best.com wrote:
>Is it possible to connect to the AS/400 remotely via the ECS modem
>line (or other line) utilizing a standard communications package such as
>Procomm or PCAnywhere?  Is additional software or hardware required
>other than then OS/400 and modems?  Please advise.    
>
>Thank you.
>root
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>umidr
>
Carl J. Galgano
cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *