How can you control that is only get called once ? if more than one client is accessing the API you could have up to by default 40 jobs running. We have 19 jobs serving the api's right now.
The first program wsrpgm02 is a router program the looks at the uri and does a DB lookup to find which program to load. It provides a level of security.
I hope you are not going to let the client side pick the program. One typo from the client developer and they may run a program you don’t want them too.
Thanks
John Slanina
On 12/11/18, 4:55 AM, "WEB400 on behalf of Rob Dixon" <web400-bounces@xxxxxxxxxxxx on behalf of robertsdixon@xxxxxxxxx> wrote:
Many thanks. The wild card is not in my config but has been put there, at
the beginning and end of each line, by a mail package when responding to my
post. I don't know why.
I don't need the SETENV code as the library list is set by my initial
program. The other difference is that I have to distinguish between the
initial program which calls my CGI program (indirectly) and that CGI
program, as, rather obviously, the initial program must only be called once.
Rob
On Mon, 10 Dec 2018 at 16:33, Slanina, John <jslanina@xxxxxxxxxx> wrote:
> Rob,
>
> Here is our setup is works fine.
> I don’t undertstand why you have the wildcard * after it.
>
>
> 21 SetEnv QIBM_CGI_CHANGE_CURLIB N
> 22 SetEnv QIBM_CGI_LIBRARY_LIST
> "QTEMP;D1BRCOBJ;D1BRFILESU;D1BRCPGMSU;D1BRFILESN;D1BRCPGMSN;D1GENNEW;D1BRFILES;D1BRCPGMS;D1PENWORK;D1PENFILES;D1NIFILES;D1TRFILES;D1IC08XXCP;D1IC08XXP;D1MW08XXCP;D1MW08XXP;D1NI08XXCP;D1NI08XXP;D1TR08XXCP;D1TR08XXP;D1BRCPGMS1;GPL;QGPL;RDB40;"
> 23
> 24 <Directory />
> 25 Order Deny,Allow
> 26 Deny From all
> 27 </Directory>
> 28
> 29 <Directory /www/brctivod1/htdocs>
> 30 Order Allow,Deny
> 31 Allow From all
> 32 </Directory>
> 33
> 34 ScriptAlias /webapi /qsys.lib/D1BRCPGMS.lib/wsrpgm02.pgm
> 35
> 36 <Directory /qsys.lib/D1BRCPGMS.lib>
> 39 Allow From all
> 40 order allow,deny
> 41 Require valid-user
> 42 DefaultNetCCSID 819
> 43 AuthType Basic
> 44 AuthName ****
> 45 CGIJobCCSID 37
> 46 CGIConvMode EBCDIC
> 47 PasswdFile %%SYSTEM%%
>
>
> 48 </Directory>On 12/10/18, 11:24 AM, "WEB400 on behalf of Buck
> Calabro" <web400-bounces@xxxxxxxxxxxx on behalf of kc2hiz@xxxxxxxxx>
> wrote:
>
> On 12/8/2018 11:48 AM, Rob Dixon wrote:
> > The header is correct for the initial display. Having got that
> screen, I
> > then started a service program for the job and set a breakpoint at
> the
> > beginning of the calc specs for my CGI program, which, as I have
> said, is
> > the same program that displayed my first screen. But when I pressed
> Enter
> > to get the second screen, there was no breakpoint. There was nothing
> in
> > CGIDEBUG for the second screen. but the log said
> >
> > [Sat Dec 08 14:18:19 2018] [error] [client 192.168.2.210]
> ZSRV_MSG0018:
> > File /QSYS.LIB/E310PRDOBJ.LIB/E31RPP.PGM/081780817443836/ does not
> exist,
> > referer:
http://192.168.2.70/cgi-bin/erros
> > [Sat Dec 08 14:18:19 2018] [error] [client 192.168.2.210]
> ZSRV_MSG0016: URI
> > in request POST /cgi-bin/E31RPP.PGM/081780817443836/ HTTP/1.1 is not
> valid,
> > referer:
http://192.168.2.70/cgi-bin/erros
> >
> > The relevant config lines seem to be
> > * 7* * ScriptAlias /cgi-bin/erros
> > /QSYS.LIB/E310PRDOBJ.LIB/E310H00000.PGM*
> > * 8* * Alias "/cgi-bin/" "/QSYS.LIB/E310PRDOBJ.LIB/"*
> > * 9* * ScriptAliasMatch ^/cgi-bin/(.*) /$1*
> > * 10*
> > * 11* * # ScriptAliasMatch ^/cgi-bin/(.*)
> /qsys.lib/E310PRDOBJ.LIB/$1*
> >
> > Line 7 executes correctly with the display of the first screen. I
> have
> > tried it with line 11 instead of line 9 and the result is the same.
>
> What's the URI after the first screen displays? Is it
>
http://192.168.2.70/cgi-bin/E31RPP.PGM/081780817443836 If so, wouldn't
> that assert ScriptAliasMatch and try to fire off program
> 081780817443836, which doesn't exist?
>
> --
> --buck
>
>
http://wiki.midrange.com
> Your updates make it better!
>
> --
> This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
> mailing list
> To post a message email: WEB400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit:
https://lists.midrange.com/mailman/listinfo/web400
> or email: WEB400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at
https://archive.midrange.com/web400.
>
>
>
> --
> This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing
> list
> To post a message email: WEB400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit:
https://lists.midrange.com/mailman/listinfo/web400
> or email: WEB400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at
https://archive.midrange.com/web400.
>
>
--
Rob Dixon
www.erros.co.uk
www.boarstall.com
--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing list
To post a message email: WEB400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
https://archive.midrange.com/web400.
As an Amazon Associate we earn from qualifying purchases.