I don't know about with reverse proxy, or the version on the IBM i, but with my linux hosts SNI just works. I set up multiple virtual hosts and inside each of them point to the respective certificate, and each site serves the correct cert.

Kevin Bucknum
Senior Programmer Analyst
Tel: 985-893-2550

-----Original Message-----
From: WEB400 [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Pete
Sent: Friday, August 31, 2018 10:11 AM
To: web400@xxxxxxxxxxxx
Subject: Re: [WEB400] SSL and reverse proxy and multiple

Yeah...I saw SNI referred to in many "generic" Apache posts but I couldn't
find documentation about it for IHS for IBM i. *Just* found the 7.2 HTTP
Server for IBM i Redbook so I'll peruse that and it does specifically state:

Server Name Indication(SNI) is an extension to the SSL and TLS protocols that
indicates what hostname the client is attempting to connect to at the start of
the handshaking process. This allows a server to present multiple certificates
on the same IP address and port number and hence allows multiple secure
(HTTPS) websites to be served off the same IP address without requiring all
those sites to use the same certificate. It is the conceptual equivalent to
HTTP/1.1 virtual hosting for HTTPS.

I hope there is a *good* example of a working configuration......

Once done, if done, I'll post up the working config so you won't have to
experiment as much as I have....

Pete Helgren
GIAC Secure Software Programmer-Java
Twitter - Sys_i_Geek IBM_i_Geek

On 8/31/2018 9:59 AM, Bradley Stone wrote:
I've tried this in the past without luck. But that was before the
apache server was able to use SNI. I haven't tried since as I want my
sites to be up. Maybe one weekend I'll give it another shot.:)

SNI -https://www.fieldexit.com/forum/display?threadid=439

Bradley V. Stone
MAILTOOL Benefit #5<https://www.bvstools.com/mailtool.html>: Easy
No confusing or obscure setup instructions, directory entries, SMTP
users, aliases or host tables. All you need is TCPIP, a connection to
the internet and you're done!

This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing list
To post a message email: WEB400@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2022 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.