Re: Zend Server installed, now how to install Wordpress?

I went into ZSMENU and chose the option for mySql. It said to press enter
to install. It ran for awhile and said mySql installed successfully. The
zMySqli subsystem is running with a job.

I still can't get into phpmyadmin. I tried moving that directory from
/usr/local/zendsvr to /www/zendsvr/htdocs but it still won't load.

I'm lost. Are there additional steps required to get to phpymadmin?

Thanks, Jack

-----Original Message-----
From: web400-bounces@xxxxxxxxxxxx [mailto:web400-bounces@xxxxxxxxxxxx] On
Behalf Of Mike Pavlak
Sent: Wednesday, March 27, 2013 5:06 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Subject: Re: [WEB400] Zend Server installed, now how to install Wordpress?

The packaging for ZendDBi is restricted to i6.1 and higher. But the MySQL
distro that is embedded in Zend Server which can be installed after you
installed Zend Server can run on V5R4.

Hope this helps!

Mike
Office Phone: (708)233-5880 Cell: (408)679-1011

-----Original Message-----
From: web400-bounces@xxxxxxxxxxxx [mailto:web400-bounces@xxxxxxxxxxxx] On
Behalf Of Jim Oberholtzer
Sent: Wednesday, March 27, 2013 12:52 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Subject: Re: [WEB400] Zend Server installed, now how to install Wordpress?

OK, V5R4 sets a stage, You can still do it if you installed MySQL with the
Zend Server.

Did you get in and set the root password for the localhost and create users
in MySQL for the host name?

Commands enclosed in [ ] since double quotes can be part of the command;

You'll have to use [mysqld_safe -user=mysql &] to start the MySQL deamon
Enter [mysqladmin version] to verify it's running Enter [ mysqladmin -u root
password "mypassword" ] to set root password Enter [ mysqladmin -u root -h
localhost "mypassword" ] to set the root password for the local host.
Enter [mysql -u root -p ] It will prompt for the password you just set.
If that works you should be good to go.

Now try phpMyAdmin with the root password.

BTW: ZendDbi came out for V5R4 a while back, although you may not be able
to download it anymore.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 3/27/2013 2:36 PM, Jack Tucky wrote:

Thanks. ZendDbi says it requires 6.1 or later.

If that's the case we're stuck until the upgrade.

Jack

-----Original Message-----
From: Jim Oberholtzer [mailto:midrangel@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, March 27, 2013 3:21 PM
To: Jack Tucky
Subject: Re: Zend Server installed, now how to install Wordpress?

I'm thinking you might need to install ZendDBi. That's the supported
MySQL now by both IBM and Zend.

It might also be time to push this over to WEB400.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 3/27/2013 2:13 PM, Jack Tucky wrote:

I didn't install Zenddbi separately. I do have the zmySql
subsystem running.

I can't get to phpmyadmin though.

Jack

-----Original Message-----
From: Jim Oberholtzer [mailto:midrangel@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, March 27, 2013 1:38 PM
To: Jack Tucky
Subject: Re: Zend Server installed, now how to install Wordpress?

Now the question is did you install ZendDBi and is the MySQL
deamon

running?

In your case I would stay with the MySQL version to avoid any
other unpleasant things you'll need to deal with.

If you do want to use DB/2 then yes, you have to change the
database

engine

prior to running the installation.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 3/27/2013 12:32 PM, Jack Tucky wrote:

> Yeah that fixed that.
>
> The install.php script fails with an internal server error.

You

> mentioned that I need to change word press to use DB2? Do I

need to

> do that before I try to run install.php?
>
> -----Original Message-----
> From: Jim Oberholtzer [mailto:midrangel@xxxxxxxxxxxxxxxxx]
> Sent: Wednesday, March 27, 2013 1:30 PM
> To: Jack Tucky
> Subject: Re: Zend Server installed, now how to install

Wordpress?

>
> Make sure the directories under the /www/htdocs have

sufficient

> authority for QTMHHTTP and QIJS. You'll have to propagate

that down

> through all of the directories.
>
> Jim Oberholtzer
> Chief Technical Architect
> Agile Technology Architects
>
>
> On 3/27/2013 12:03 PM, Jack Tucky wrote:

>> > Thanks Jim. I extracted the WP directory to

/www/zendsvr/htdocs

>> > but I can't figure out the URL that I should hit

for

install.php.

>> >
>> >
>> > This one gives me forbidden:
>> >
>> > Server:10088/wp-admin/install.php
>> >
>> > My install on the Iseries is in

/www/zendsvr/htdocs/wp-admin

>> >
>> > Thanks, Jack.
>> >
>> > -----Original Message-----
>> > From: Jim Oberholtzer

[mailto:midrangel@xxxxxxxxxxxxxxxxx]

>> > Sent: Friday, March 22, 2013 9:29 AM
>> > To: Web Enabling the AS400 / iSeries
>> > Subject: Re: Zend Server installed, now how to

install

Wordpress?

>> >
>> > Jack,
>> >
>> > I cross posted to Web400 and privately to you as

well.

>> >
>> > Yes, just follow the install procedure for

Wordpress. Please

note

>> > that they go out of their way to state they do not

support the

>> > ZendDBi but I have it running and it works fine,

if you change

the

>> > storage engine to use DB/2 instead of MySQL.
>> >
>> > Jim Oberholtzer
>> > Chief Technical Architect
>> > Agile Technology Architects
>> >
>> >
>> > On 3/21/2013 7:30 PM, Jack Tucky wrote:

>>>> >> > I've been googling around and

I see the 5 minute

installation

>>>> >> > method for wordpress.
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> > Is that how I should be doing

it on the i?

>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> > Extract the downloaded zip

into the web server

directory and

then

>>>> >> > run the install script?
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> > Thanks, Jack.
>>>> >> >
>>>> >> > --

--

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing
list To post a message email: WEB400@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.
--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing
list To post a message email: WEB400@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.