Re: Start / Stop Server

[Jim Oberholtzer <midrangel@xxxxxxxxxx>]

A further addendum.  The process to clone the default Zendsvr instance 
of the Apache server is very easy in the administration GUI, and not 
hard from the command line.  I almost always will clone it and run on a 
different port (usually 80 BTW) and leave the as delivered Zend 
instances alone.  That way modifications to your site do not affect the 
base instance so you can test base functionality in the event of a problem.

You can set your own standards but I have found if you change the 
default directory to /usr/local/myapacheinstance and copy the .htdocs 
file in there (keeps Zend routing working) it's easy then to create 
virtual hosts for development and test/QA.  Add the Apache directive to 
allow personal web sites, and each of your developers can have their own 
development location as well (http://www.mydomain.com/~developername)

If your going to the COMMON Annual Conference, my session on Zend admin 
will show you how to do this.  I will also demonstrate how to clone the 
environment to your windows or Linux desktop.

The blue button does in fact restart the default instances of zendsvr in 
the  IBM i, Windoze, and Linux environments; I just tried it.

Jim Oberholtzer
CEO/Chief Technical Architect
Agile Technology Architects, LLC


On 2/24/2011 9:46 AM, Mike Pavlak wrote:
> > From the page of "Mike is a goof", I need to clarify a bit further and fall on a sword...sort of...
>
> The Blue button DOES restart Apache, BUT...only the default ZENDSVR instance.  Because PHP is threaded through the FastCGI processes, the Apache server gets  kick in the pants too.  I just tested this and verified it.  Thank you to Sam P. for "enlightening" me.:-)  BUT the blue button will only look for the default ZENDSVR instance.  So, if you have hacked your Apache instance name or you have plugged the FastCGI processes into an existing Apache configuration say for CGIDEV2, Net.Data or WebSphere you will need to restart those manually using the instructions that Jim O provided.  Thank you JIM!!!
>
> FWIW: I am told that Zend Server on Linux and Windows behaves the same way by performing a "graceful" restart of Apache and PHP.  For those of you considering other OS's in a clustered Linux or Windows implementation, the Blue button performs a rolling restart of the clustered servers to provide consistent availability of the site(s).
>
> Hope this is helpful!
>
> Mike
>
> mike.p@xxxxxxxx    Cell: (408)679-1011    Office: (630)928-1476
>
> Zend Server for IBM i available athttp://www.zend.com/en/products/server/zend-server-5-new-ibmi
>
>
> -----Original Message-----
> From:web400-bounces@xxxxxxxxxxxx  [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Mike Pavlak
> Sent: Wednesday, February 23, 2011 3:29 PM
> To: Web Enabling the AS400 / iSeries
> Subject: Re: [WEB400] Start / Stop Server
>
> Thanks Jim!   FWIW:here is a little more info.
>
> The blue "Restart PHP" button only reloads the PHP.ini and other Zend Server configuration files.  Restarting the HTTP Server Powered by Apache will reload the Apache and FastCGI configuration files.
>
>
> The PHP.ini file contains settings and directives that control the behavior of PHP.  Most folks will use the Zend Server admin interface to adjust these settings, yet others insist on hacking the file with whatever editor is laying around.  My recommendation is to stick with the admin interface.  Regardless, it is a VERY good idea to ensure you are backing up the directory that warehouses these files on a regular basis. (/usr/local/zendsvr). This will make recovering your PHP configuration a lot easier should catastrophe strike!  The PHP.ini file resides in the /etc directory off of /zendsvr and contains the standard PHP directives like the include_path, display_errors, etc.
>
> The FastCGI file is located near the Apache configuration files and is reloaded at the same time the Apache configuration is loaded.  I hope it stands to reason that since IBM "owns" the HTTP and FastCGI processes and Zend "owns" the PHP configurations that the two worlds are separate in how they are managed.
>
> Hope this helps!
>
> Mike
>
> mike.p@xxxxxxxx    Cell: (408)679-1011    Office: (630)928-1476
>
> Zend Server for IBM i available athttp://www.zend.com/en/products/server/zend-server-5-new-ibmi
>
>
> -----Original Message-----
> From:web400-bounces@xxxxxxxxxxxx  [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
> Sent: Wednesday, February 23, 2011 2:47 PM
> To: Web Enabling the AS400 / iSeries
> Subject: Re: [WEB400] Start / Stop Server
>
> You have to cycle the apache server to get the changes to take effect.
>   From the command line:
>
> STRTCPSVR SERVER(*HTTP)
>             RESTART(*HTTP)
>             HTTPSVR(MYINSTANCE)
>
>
> Jim Oberholtzer
> CEO/Chief Technical Architect
> Agile Technology Architects, LLC
>
>
> On 2/23/2011 2:33 PM, Brian Piotrowski wrote:
> > >  Hi All,
> > >
> > >  If I make changes to the httpconf file, do I need to stop and restart the server or are the changes automatically applied?  If so, is it done with the "restart PHP" button on the lower-right of the admin screen?
> > >
> > >  Thanks!
> > >
> > >  /b;
> > >
> > >  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> > >  Brian Piotrowski
> > >  Assistant Mgr. - I.T.
> > >  Simcoe Parts Service, Inc.
> > >  Ph: 705-435-7814 x343
> > >  Fx: 705-435-5029
> > >  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> > >  http://www.simcoeparts.com
> > >