Re: Using a Verisign Certificate for SSL

No, no space.  That's just an email artifact, Alfred.  But given yours and
Chris's input, I'm going to go back in with the VirtualHost.  Are you sure
you can access your SSL using just the IP address?

Joe

> -----Original Message-----
> From: web400-bounces@xxxxxxxxxxxx [mailto:web400-bounces@xxxxxxxxxxxx] On
> Behalf Of Alfredo Delgado
> Sent: Tuesday, March 28, 2006 12:49 PM
> To: Web Enabling the AS400 / iSeries
> Subject: Re: [WEB400] Using a Verisign Certificate for SSL
> 
> Is there really a space in the IP address for the port 443 listen
> directive?
> 
> If you add the following lines, I would expect https://10.20.30.40/ to
> take you to the same place http://10.20.30.40/ does.
> 
> <VirtualHost 10.20.30.40:443>
>    SSLEngine On
>    SSLAppName QIBM_HTTP_SERVER_MYINSTANCE
> </VirtualHost>
> 
> In my case, I used *:443 because I'm only planning on running off one IP
> therefore only one cert.
> 
> When I was installing an SSL cert, I arrived at that solution via the
> directions in the iSeries Information Center for accessing the web
> administration server securely. In that example, they used ports 2001
> http and 2010 for https.