Yeah, that is right. Since the RDp debug engine is the one to issue STRDBG
command, I guess it should run the CHGDBG command, instead of the
application job (your job).
I am not sure about the checking. Maybe you can search for the user job
information related APIs to see if you can see there is any flag indicating
the current job is under service or debug?
Thanks,
Xuan Chen, Problem Determination Tools for IBM i
(905) 413-3769 T/L 313-3769
xuanchen@xxxxxxxxxx
"Anderson, Kurt"
<KAnderson@enghou
se.com> To
Sent by: "Rational Developer for IBM i /
wdsci-l-bounces@m Websphere Development Studio Client
idrange.com for System i & iSeries"
<wdsci-l@xxxxxxxxxxxx>
cc
05/03/2013 03:06
PM Subject
Re: [WDSCI-L] RDP Debug when STRDBG
active
Please respond to
Rational
Developer for IBM
i / Websphere
Development
Studio Client
for System i &
iSeries
<wdsci-l@midrange
.com>
Hi Xuan,
That makes sense and is what I was expecting. But if it's running STRDBG
immediately after the STRSRVJOB, why wouldn't the CHGDBG in the CL complete
successfully? Maybe because it's in the 'wrong' job? Meaning if you
remotely (from another job) debug a job, the CHGDBG that occurs actually
isn't aware of the 'remote' debugging that is occurring. If that's the
case, which now starts to make sense, I wonder is there a way for the CL to
know it's being remotely debugged so I can check that?
-Kurt
-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On
Behalf Of Xuan Chen
Sent: Tuesday, March 05, 2013 1:27 PM
To: Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries
Subject: Re: [WDSCI-L] RDP Debug when STRDBG active
Not sure if this information is useful...
The debug scenario used by RDp debugger is different from using an
interactive STRDBG command which is running right in the same job as the
job running the application.
It actually use STRSRVJOB, and then STRDBG. So the debugger is running in
a different job as the job the application is running.
Thanks,
Xuan Chen, Problem Determination Tools for IBM i
(905) 413-3769 T/L 313-3769
xuanchen@xxxxxxxxxx
"Anderson, Kurt"
<KAnderson@enghou
se.com> To
Sent by: "Rational Developer for IBM i /
wdsci-l-bounces@m Websphere Development Studio Client
idrange.com for System i & iSeries"
<wdsci-l@xxxxxxxxxxxx>
cc
05/03/2013 12:56
PM Subject
Re: [WDSCI-L] RDP Debug when STRDBG
active
Please respond to
Rational
Developer for IBM
i / Websphere
Development
Studio Client
for System i &
iSeries
<wdsci-l@midrange
.com>
Mark,
In the logic I provided, if CHGDBG fails, it will STRDBG. If it succeeds,
it will not call STRDBG. Your suggestion seems to leave STRDBG to always
be called, which is what the issue presumably is. The way I have it now is
actually nice when I do an interactive STRDBG in green screen - no longer
errors on STRDBG as already being in debug mode.
Jim: Yep, all ILE here.
-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On
Behalf Of Mark S Waterbury
Sent: Tuesday, March 05, 2013 11:41 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries
Subject: Re: [WDSCI-L] RDP Debug when STRDBG active
Kurt:
I think this logic is flawed, because the CHGDBG will "work" and not throw
an exception if you are debugging this program via RDp (an SEP), so "debug"
is "active". =-O
Instead, try this:
Just remove the CHGDBG through the DEBUG: label and, immediately after
your STRDBG statement, insert this:
MONMSG MSGID(CPF0000) EXEC(DO)
CHGDBG UPDPROD(*NO)
ENDDO
That way, if "debug is already active", you issue CHGDBG to ensure you have
UPDPROD(*NO) specified.
I think that will accomplish your goal.
HTH,
Mark S. Waterbury
On 3/5/2013 12:23 PM, Anderson, Kurt wrote:
Seemed like a good idea. Unfortunately this doesn't seem to work.
The first statement in my CL was changed to CHGDBG. In RDP I created
a
SEP for that program with a breakpoint on the CHGDBG statement.
Unfortunately the statement ran w/o the breakpoint stopping on it. (In
RDP I see the little blue square next to the line number after setting the
breakpoint.)
Here is the debug code modified to use ChgDbg.
CHGDBG
MONMSG MSGID(CPF0000) EXEC(GOTO DEBUG)
GOTO CMDLBL(SKIPDEBUG)
Debug:
STRDBG PGM(TST_EDIT) UPDPROD(*NO)
SkipDebug:
The SEP brings up the CL and stops on the PGM line. I click resume
(f8)
and doesn't stop on the breakpoint. When I start the program and do Step
Over, I see that it does execute CHGDBG, so I don't know why it's not
breaking there. CHGDBG fails so it continues to STRDBG.
Well, I guess I've put enough time into this for today. I have a
program
issue to resolve...
Thanks for the feedback,
Kurt
-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx
[mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Dave Shaw
Sent: Tuesday, March 05, 2013 10:52 AM
To: Rational Developer for IBM i / Websphere Development Studio Client
for System i & iSeries
Subject: Re: [WDSCI-L] RDP Debug when STRDBG active
Are you allowed to change the CL? If so, you could condition the
STRDBG
so that it doesn't execute if the job is already in debug. I think a
CHGDBG with no parameters will throw an error that you can monitor for to
condition the STRDBG.
Dave Shaw
Mohawk Industries
----- Original Message ----
From: "Anderson, Kurt" <KAnderson@xxxxxxxxxxxx>
To: "Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (wdsci-l@xxxxxxxxxxxx)"
<wdsci-l@xxxxxxxxxxxx>
Sent: Tue, March 5, 2013 11:25:01 AM
Subject: [WDSCI-L] RDP Debug when STRDBG active
While I love RDP, I haven't moved from STRDBG over to debugging from
within RDP. I have a program issue and I thought I'd give RDP's debug a
try.
We have test jobs setup that automatically run STRDBG to prevent
updating
of production libraries. Using StrDbg, when it hits that line I get an
error I can ignore. Now, when I set the SEP in a RPG source, which is a
program called by the CL that executes STRDBG (among other things), the
debug view is never coming up. I tried adding a SEP to the CL before the
STRDBG gets hit, and when that happens, I get an error and can hit ignore,
but for some reason it's not entering the RPG code for me to debug. In the
RPG program I set the breakpoint at the very beginning to make sure I
wasn't running into an issue where the
statement I put a breakpoint on wasn't getting called. I just now set a
breakpoint in the CL after the STRDBG statement, and it doesn't break.
I've now spent about 45min on this and feel like I've had no success.
I
know our method of testing (using a mix of production and test libraries)
isn't going to change. Are there any other suggestions as to what I might
try?
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post a
message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit:
http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit:
http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/wdsci-l.
midrange.com
