Thanks Sharon. Well noted.



________________________________
From: McLINTOCK Sharon <SMcLintock@xxxxxxxxxx>
To: System 21 Users <system21@xxxxxxxxxxxx>
Sent: Wed, January 19, 2011 6:05:02 PM
Subject: Re: [SYSTEM21] Need Help

Hi,

We were on Aurora V1.2 with V5R3 of the OS and recently tried to upgrade to
V6R1. We had to abandon this and upgrade to V5.4 instead! We had major
problems with some Workflow Programs not being observable that were not
highlighted in the ANZOBJCVN Report. We could not get Source for these programs
so could not recompile them and therefore could not progress with the upgrade.

Luckily we had decided to do the conversion on a Test Box first.

Points to note:

* Do it on a Test Box first and test thoroughly
* Infor have some known objects that wont convert and have PTF's for them
* Liaise with the Software Vendors of all other applications you have running on
the AS/400 and check if you need any updates in order for their software to run.

Good Luck,

Sharon

-----Original Message-----
From: system21-bounces@xxxxxxxxxxxx [mailto:system21-bounces@xxxxxxxxxxxx] On
Behalf Of Srimal Athukorale
Sent: 19 January 2011 10:45
To: System 21 Users
Subject: Re: [SYSTEM21] Need Help

Thanks David for quick info. We are also in V5R4. So far no issues, since v6 is
out there and in case one fine day if IBM says No more V5xx !!! so we thought of

checking, please do share if u find more information.

Regards,

Srimal.



________________________________
From: David Dewick <david.dewick@xxxxxxxxxxxxx>
To: System 21 Users <system21@xxxxxxxxxxxx>
Sent: Wed, January 19, 2011 5:29:24 PM
Subject: Re: [SYSTEM21] Need Help

IMPORTANT: This message is private and confidential. If you have received this
message in error, please notify the sender and remove the message and all
attachments from your system.
Hi Srimal

We've just moved to a V5R4 box and so far, everything's ok. However,
when I looked on the Infor downloads site, I did see some V6R1 downloads
for S21 3.5.2. I haven't checked these out yet, but I'm hoping :-)

David Dewick


Darcast Crankshafts Limited
David Dewick

Cornwall Road
Smethwick
West Midlands
B66 2JR
Tel: 0121 565 7250
Mobile: 07796 155045
Email: mailto:david.dewick@xxxxxxxxxxxxx
Website: www.darcast.com
--------------------------------------------------------------------------
This message contains confidential information and is intended only for
system21@xxxxxxxxxxxx. If you are not system21@xxxxxxxxxxxx you should not
disseminate, distribute or copy this e-mail. Please notify
david.dewick@xxxxxxxxxxxxx immediately by e-mail if you have received this
e-mail by mistake and delete this e-mail and any attachments from your system.
E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses. David Dewick therefore does not accept liability

for any errors or omissions in the contents of this message, which arise as a
result of e-mail transmission. If verification is required please request a
hard-copy version. Any views or opinions presented are solely those of David
Dewick and do not necessarily represent those of the company.
--------------------------------------------------------------------------
-----Original Message-----

From: system21-bounces@xxxxxxxxxxxx
[mailto:system21-bounces@xxxxxxxxxxxx] On Behalf Of Srimal Athukorale
Sent: 19 January 2011 10:21
To: System21 S21 s21
Subject: [SYSTEM21] Need Help

Hi

Can anybody help me to find whether S21 v3.5 will work on os/400 v6 and
above.

Thanks to all in advance.

Srimal.



_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.


Darcast Crankshafts Limited is a limited company registered in England and
Wales.
Registered number: 4992386.
Registered office: Cornwall Road, Smethwick, West Midlands, B66 2JR, United
Kingdom
Darcast Crankshafts Limited is a wholly-owned subsidiary of Cornwall Holdings
Limited
Please note that Darcast Crankshafts Limited may monitor email traffic data and
also the content of email for the purposes of security and staff training.
-----Original Message-----
From: system21-bounces@xxxxxxxxxxxx
[mailto:system21-bounces@xxxxxxxxxxxx] On Behalf Of Srimal Athukorale
Sent: 19 January 2011 10:21
To: System21 S21 s21
Subject: [SYSTEM21] Need Help

Hi

Can anybody help me to find whether S21 v3.5 will work on os/400 v6 and
above.

Thanks to all in advance.

Srimal.



_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.

_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.



_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.

Vallourec Mannesmann Oil & Gas UK Ltd, Registered in Scotland No. 147386.
Registered Office: Clydesdale Works, Clydesdale Road, Mossend ML4 2RR



This e-mail message is confidential and for use by the addressee only. If the
message is received by anyone other than the addressee, please return the
message to the sender by replying to it and then delete the message from your
computer. Internet e-mails are not necessarily secure. Vallourec Mannesmann Oil
& Gas UK Ltd does not accept responsibility for changes made to this message
after it was sent.



Whilst all reasonable care has been taken to avoid the transmission of viruses,
it is the responsibility of the recipient to ensure that the onward
transmission, opening or use of this message and any attachments will not
adversely affect its systems or data. No responsibility is accepted by Vallourec
Mannesmann Oil & Gas UK Ltd in this regard and the recipient should carry out
such virus and other checks as it considers appropriate.

BE VIGILANT: we have been informed by some customers of phishing emails relating
to job opportunities made to look like they are from our company but which are
actually from identity thieves. It is not Vallourec's policy to send
unsollicited emails under any circumstances. Please note that all our job
opportunites are available on www.vallourec.com. If you get an email that looks
suspicious, do not respond and alert us by forwarding it to helpdesk@xxxxxxxxxx.


_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list
To post a message email: SYSTEM21@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/system21.



This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].