RE: Problem with the API: QtmhWrStout

Peter,

I just double checked and we are using the newer QZHBCGI service program
for the API. Any other ideas?

Thanks

Mike  

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Peter Connell
Sent: Thursday, October 27, 2005 4:26 PM
To: RPG programming on the AS400 / iSeries
Subject: RE: Problem with the API: QtmhWrStout

Mike,
You may or may not be aware that a while back IBM in fact implemented
the same functionality via a new *SRVPGM that also provides some
additional service procedures. The old *SRVPGM was QHTTPSVR/QTMHCGI. The
new *SRVPGM is QHTTPSVR/QZHBCGI. 

Obviously, you would expect that programs using the original interface
to operate without impact.  However, we found this not to be the case,
in particular with respect to the error parameter. After raising the
issue with IBM and explaining at length what the problem was, they were
somewhat surprised when able to demonstrate that there was indeed a
problem.

IBM's official response was to refer to some piece of documentation
(somewhere in the HTTP server doc) which indicated the existence of the
new *SRVPGM QZHBCGI with a recommendation that it should be used in
preference to QTMHCGI and implied that it would be hopeful for one to
expect any patch for the problem. 

Rather than recompile, I believe we just replaced the old QTMHCGI by
duplicating QZHBCGI but giving it the same name as the old one, QTMHCGI.
To avoid issues with subsequent development we changed the relevant
binding directory used by the compile so that it now references the new
*SRVPGM.

Cheers, Peter

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Mike Silvers
Sent: Friday, 28 October 2005 5:57 a.m.
To: RPG400-L@xxxxxxxxxxxx
Cc: Christopher Peel
Subject: Problem with the API: QtmhWrStout

We are running into a problem with the API QtmhWrStout (used to write to
stdout).  We have a process that utilizes this API to interact with the
web.  The RPG program has been working for a few years with no problems.
WE now converted the web server from the original server to the apache
server.  Now, when writing to this api, it appears that the data is
partially encoded in ASCII and partly in EPCDIC.  It is really weird.
Has anyone else run into this problem?  Any ideas?
 
=======================================
Mike Silvers
Senior Programmer/Analyst
iSeries Websphere Certified
Hainey Business Systems
Branch Office:  (410) 219-2695
Cell: (443) 521-3887
Main Office Direct: (717) 771-2358
Main Office General:  (717) 718-9601 ext 7139
Fax: (877) 804-9589
http://www.hbs-inc.com <http://www.hbs-inc.com/>
AIM:  IBMJavaMan
=======================================
 
--
This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing
list To post a message email: RPG400-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/rpg400-l.

########################################################################
#############
This correspondence is for the named person's use only. It may contain
confidential or legally privileged information, or both. No
confidentiality or privilege is waived or lost by any mistransmission.
If you receive this correspondence in error, please immediately delete
it from your system and notify the sender. You must not disclose, copy
or rely on any part of this correspondence if you are not the intended
recipient. Any views expressed in this message are those of the
individual sender, except where the sender expressly, and with
authority, states them to be the views of Baycorp Advantage. If you need
assistance, please contact Baycorp Advantage on either :- Australia
133124 or New Zealand +64 9 356 5800

--
This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing
list To post a message email: RPG400-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/rpg400-l.