× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Catching up on a really old message...
Jeff, most rack mounted computer equipment has dual power supplies. If one
fails then the other run can run solo.
Or, in the co-location facilities we use we have two breaker boxes. One
runs off of one UPS the other runs off of the other UPS. The left side of
the rack uses one UPS breaker box and the right side uses the other. You
could consider a similar setup.
I think there's some obscure electrical property which says do not leave
one on UPS and one direct. But you'd have to ask the Larry's, etc of the
world about that.

Another interesting little electrical property. Most computer equipment is
rated from 100-240 input voltage. Down to and including your cell phone
charger. Our co-location centers do not have any 110 in the racks.
Related to that, do not use a household grade power strip there. They are
only rated for 110 and you plug that into 220 and you will see smoke.
Trust me, this I know. If you plan on doing some serious racking in such a
center you might want to check the power supply on the charging unit for
your cordless drill. And look for a wall outlet they use for cleaning
purposes, etc.

On Thu, Jun 8, 2023 at 10:13 AM Jeff Crosby <jlcrosby@xxxxxxxxxxxxxxxx>
wrote:

Our IBM i has been in a data center for several years. Since we no longer
needed the Nfinity UPS for such a small load (Sonicwalls, DNS servers,
switches, etc) we installed a rackmounted Tripp Lite SU1500RTXL2Ua with an
internal battery and an external battery. This gives us just under 2 hours
in a power outage.

Imagine my surprise, now that it's time to replace the batteries, the
internal battery *is* hot swappable, but the external battery is *not* hot
swappable. So we have to shut down the rack to replace the batteries. If
anything, I would have expected the opposite.

It is ironic that replacing the batteries in an "uninterruptible" system
causes an interruption.

--


*Jeff Crosby*
Senior Vice President
UniPro FoodService/Dilgard
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531
direct.dilgardfoods.com

The opinions expressed are my own and not necessarily the opinion of my
company. Unless I say so.
--
This is the PC Technical Discussion for IBM i (AS/400 and iSeries) Users
(PcTech) mailing list
To post a message email: PcTech@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/pctech
or email: PcTech-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/pctech.



As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.