× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I tried that, Scott. Nothing shows up. There are 18 wireless access
points (16 warehouse, 2 office) and 2 switches (1 office, 1 warehouse) in
that range.

I'm checking now with the installer to see if they have some offsite router
"interfering" with this.

This installer no longer will support this for us. They installed it 4
years ago and have decided if they do not control a customer's entire
infrastructure, they will support none of it, so we were summarily dropped.

They have already pledged to help the new support company (of which we
already signed a contract with) to get everything moved over. There are 3
SSIDs involved, 2 still working and 1 not working because their router has
it "isolated." I was just trying to learn what I could in the meantime.


On Thu, Mar 30, 2023 at 10:34 AM Scott Klement <pctech@xxxxxxxxxxxxxxxx>
wrote:

You can tell Advanced IP Scanner which addresses to check... there's a
blank at the top of the window (below the "scan" button, to the left of
the "search" box) and you can just type 192.168.190.1 - 254

That tells it to scan IP addresses in the range of 192.168.190.1 -
192.168.190.254

I wouldn't change your netmask -- that changes the way packets are
routed from your PC. If you did that, most likely you would no longer be
able to reach 192.168.x.x computers unless they were on your LAN.

On 3/30/2023 7:46 AM, Jeff Crosby wrote:
Don't laugh at the ignorance on display with these questions. :)

My Windows 10 PC has an IP address of 192.168.0.x and a subnet mask of
255.255.255.0.

Does this mean I cannot "see" devices on the network with IP addresses in
the 192.168.190.x range with Advanced IP Scanner?

If I change the subnet mask to 255.255.0.0 would I then "see" these
devices? A reboot required?

What is the danger of doing so?

Thanks.

--
This is the PC Technical Discussion for IBM i (AS/400 and iSeries) Users
(PcTech) mailing list
To post a message email: PcTech@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/pctech
or email: PcTech-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/pctech.




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.