Re: [IBMiOSS] Creating Stream Files with Python -- OPENSOURCE

There is a very active community on the Ryver that discusses python. I don't post much if any over there, but I do go back and read the chats every so often and pick up some good stuff. Especially now that I'm actually moving some python into production. The only problem is, the only signup link that I can find doesn't work anymore. Maybe Bill or someone else can chime in with the current link.

________________________________
From: OpenSource <opensource-bounces@xxxxxxxxxxxx> on behalf of Craig Richards <craig@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 2, 2018 8:34 AM
To: IBMi Open Source Roundtable
Subject: Re: [IBMiOSS] Creating Stream Files with Python

Thanks Kevin and Jeremy.

Yes that does work for me.

Thanks for the info. I'll have to read up a bit on some of this.
Nice one. I appreciate you taking the time to post.
best regards,
Craig

On Tue, 2 Oct 2018 at 14:27, Kevin Bucknum <Kevin@xxxxxxxxxxxxxxxxxxx>
wrote:

This works.

import ibm_db_dbi as db2
from itoolkit import *
from itoolkit.db2.idb2call import *

itool = iToolKit()
itransport = iDB2Call()
itool.add(iCmd5250('dspsyssts', 'dspsyssts'))
itool.call(itransport)
dspsyssts = itool.dict_out('dspsyssts')
if 'error' in dspsyssts:
print (dspsyssts['error'])
exit()
else:
print (dspsyssts['dspsyssts'])

________________________________
From: OpenSource <opensource-bounces@xxxxxxxxxxxx> on behalf of Craig
Richards <craig@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 2, 2018 7:46 AM
To: IBMi Open Source Roundtable
Subject: Re: [IBMiOSS] Creating Stream Files with Python

So, to solve my particular problem of setting the ccsid of a streamfile (
not the data, the ccsid tag on the file ) I can run:

import subprocess
subprocess.run(['setccsid', '1208', 'myfile'])

I guess this seems a reasonable solution?

I can assume that Kevin's comment about 32 vs 64 bit architecture might
explain the original question.

I'd still like to know what other transports I could use if I needed to
call a program or run a command in 64 bit and also I'd be interested to
find out if the config.itransport is an error in the itoolkit documentation
or something that has changed.

On Tue, 2 Oct 2018 at 13:22, Craig Richards <craig@xxxxxxxxxxxxxxxx>
wrote:

Hi Bryan,

Thanks for your post.
Well, that is certainly a difference between the two:

Python 3.4.6 (default, Mar 21 2017, 20:59:04)
[GCC 4.8.2] on aix6

platform.architecture(), sys.maxsize
(('32bit', ''), 2147483647)

==================================

Python 3.6.6 (default, Aug 3 2018, 19:02:01)
[GCC 6.3.0] on aix6

platform.architecture(), sys.maxsize
(('64bit', 'COFF'), 9223372036854775807)

I guess Kevin's comment of July this year is still applicable:

*"ibCall does not work when run 64-bit. For the time being you will

needto

use a different transport."*

Although I have no clue what other transports are available.
I'd even say I don't really know what a transport is - I'd guess it's

some

kind of linkage between python and the IBMi OS.

thanks for the info.
best regards,
Craig

On Tue, 2 Oct 2018 at 12:37, Bryan Dietz <bdietz400@xxxxxxxxx> wrote:

I recall reading this:
https://archive.midrange.com/opensource/201807/msg00030.html

[https://d3rmfedvo21r9f.cloudfront.net/images/archive_logo.gif]<https://archive.midrange.com/opensource/201807/msg00030.html>

Re: [IBMiOSS] iToolKit not working on python3 and you environment by Kevin Adler<https://archive.midrange.com/opensource/201807/msg00030.html>
archive.midrange.com
Re: [IBMiOSS] iToolKit not working on python3 and you environment -- iLibCall does not work when run 64-bit. For the time being you will need to use a different transport. ----- Original message ----- From: Massimo Fantin <massimo.fantin@xxxxxxxxxxxxxx> Sent by: "OpenSource" <opensource-bounces@xxxxxxxxxxxx> To: "opensource@xxxxxxxxxxxx" <opensource@xxxxxxxxxxxx> Cc: Subject: [IBMiOSS] iToolKit not working on python3 and you environment Date: Mon, Jul 16, 2018 7:15 AM From the example on [1]http://python-itoolkit.readthedocs.io/en/latest/examples.html with python3 and yum r...

I do not know if it applies, but wanted to re-pass along

Bryan

Craig Richards wrote on 10/2/2018 6:56 AM:

Hi Kevin,

Thanks for taking the time to reply.

I don't know if you had a particular command line program in mind for
setting the CCSID but it seems to me that the easiest way to achieve

it

might be to use the CHGATR command.
It's certainly simpler from a 'user' perspective than coding up a call

to

qp0lSetAttr()

Seeking about for information on how to call AS400 Commands / Programs

from

Python lead me to a post which I noticed you had contributed to:

https://stackoverflow.com/questions/50576341/how-to-call-an-rpg-program-from-python

And so that lead me to try a test of:

from itoolkit import *
from itoolkit.lib.ilibcall import *
itransport = iLibCall()
itool = iToolKit()
itool.add(iCmd('sndmsg', 'SNDMSG "WIBBLE" RICHARC'))
itool.call(itransport)
output = itool.dict_out('sndmsg')
print(output)

This works from Python 3.4.6 and prints:
{'success': '+++ success SNDMSG "WIBBLE" RICHARC'}

However if I run it from Python 3.6.6 ( /QopenSys/pkgs/bin/python3 )

it

fails and prints:
{'error': {'error': '*NODATA', 'sndmsg': {...}}}

If my memory serves me correctly, 3.4.6 is what came with the system

and I

installed 3.6.6 via IBMi ACS Open Source Package Management.

I'm not sure what the problem is with this, forgive my ignorance.

Another thing which also puzzled me is that the documentation for

itoolkit

which you kindly linked in your post:

https://python-itoolkit.readthedocs.io/en/latest/examples.html

is different to the code you supplied in the original post and doesn't

work

for me with either version of python.
For example the code for DSPSYSSTS:
import config
from itoolkit import *
itool = iToolKit()
itool.add(iCmd5250('dspsyssts', dspsyssts'))
itool.call(config.itransport)
...

This codes fails from both versions of python with:
AttributeError: 'module' object has no attribute 'itransport'

So that leaves me with the following questions:

1. Is CHGATR from python a reasonable way to set the "tag" of the

IFS

file. I guess there might be something I can run more directly

from

QSH via

subprocess() that might let me set the CCSID.
2. Is itoolkit a reasonable way to make the call to CHGATR. I'm a

little

confused about it being called an XMLSERVICE collector but is that

just the

way it is communicating with the OS?
3. Why doesn't my example work with Python 3.6.6 - is it running a
different version of itoolkit? using help() for iCmd, the syntax

looked

unchanged.
4. Are the code examples for itoolkit wrong or is it to do with

change

code versions or assumed imports or something?

Sorry for my ignorance and the many questions.
What can I say, I'm a curious man...

thanks and best regards,
Craig

On Mon, 1 Oct 2018 at 17:29, Kevin Adler <kadler@xxxxxxxxxx> wrote:

Python has its own built-in codecs and does not use the system

codecs.

You
can see the list (which does not include cp285) here:
[1]

https://docs.python.org/3/library/codecs.html#standard-encodings

As Python runs in PASE it will open the file tagged with whatever

the

PASE
ccsid is (which defaults to 819 except in rare cases). There is
currently
no mechanism in Python to match the CCSID tag with the encoding

of

the

data, though there are various command line programs you could

call

manually from within Python to do so.

----- Original message -----
From: Craig Richards <craig@xxxxxxxxxxxxxxxx>
Sent by: "OpenSource" <opensource-bounces@xxxxxxxxxxxx>
To: IBMi Open Source Roundtable <opensource@xxxxxxxxxxxx>
Cc:
Subject: [IBMiOSS] Creating Stream Files with Python
Date: Mon, Oct 1, 2018 11:13 AM

Hi All,

I can create streamfiles with different encodings in the IFS

using

python
using the encoding parameter and this works fine e.g:

f = open('asci.txt', 'w', encoding='cp819')

This is good. And fine too. Some might say dandy.
However if I look at the attributes of the stream file it is

always

CCSID
819 if I am creating a new file.

This means that using DSPF to look at the data on the IBMi will
display
the
data incorrectly if that data is not actually written with

encoding

819.

I can modify the file manually using EDTF to change the file's

CCSID

and
then it will be displayed correctly ( within the limitations of

the

5250
Client ) however I assume there is a way to set this attribute
correctly
for new files using python?
I understand that the IBMi is fairly unique in that it has

additional

attributes on stream files that store information such as the
(intended)
ccsid but I know it is possible to set these correctly when

using the

unix
open API to create stream files ( for example )

Additionally I'm using an IBMi in the UK and QCCSID is set to

285, I

get
an
error in the above code if I specify encoding='cp285' although

it is

quite
happy to use encoding='cp037'.

Not that I have a requirement to encoding in the IFS in 285 but

I was

a
little surprised that 37 was supported but not 285 - especially

given

that
it is a UK not US box.

However my main question is - should I be using a different

method to

create my streamfiles if I want the endcoding of the streamfile

( the

file
header, not the actual data ) to be other than 819?

I've tried using the codecs.open method but that seems to work

the

same
-
it creates the data correctly but the CCSID for the file itself

is

always
819 for NEW files.

Thanks kindly,
Craig
--
This is the IBMi Open Source Roundtable (OpenSource) mailing

list

To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [2]

https://lists.midrange.com/mailman/listinfo/opensource

or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [3]https://archive.midrange.com/opensource.

References

Visible links
1.

https://docs.python.org/3/library/codecs.html#standard-encodings

2. https://lists.midrange.com/mailman/listinfo/opensource
3. https://archive.midrange.com/opensource
--
This is the IBMi Open Source Roundtable (OpenSource) mailing list
To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/opensource
or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/opensource.

--
This is the IBMi Open Source Roundtable (OpenSource) mailing list
To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/opensource
or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/opensource.

--
This is the IBMi Open Source Roundtable (OpenSource) mailing list
To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/opensource
or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/opensource.

[https://www.medtronsoftware.com/img/MedtronMinilogo.bmp] Kevin Bucknum
Senior Programmer Analyst
MEDDATA / MEDTRON
120 Innwood Drive
Covington LA 70433
Local: 985-893-2550
Toll Free: 877-893-2550
https://www.medtronsoftware.com

CONFIDENTIALITY NOTICE

This document and any accompanying this email transmission contain
confidential information, belonging to the sender that is legally
privileged. This information is intended only for the use of the
individual or entity named above. The authorized recipient of this
information is prohibited from disclosing this information to any other
party and is required to destroy the information after its stated need has
been fulfilled. If you are not the intended recipient, or the employee of
agent responsible to deliver it to the intended recipient, you are hereby
notified that any disclosure, copying, distribution or action taken in
reliance on the contents of these documents is STRICTLY PROHIBITED. If you
have received this email in error, please notify the sender immediately to
arrange for return or destruction of these documents.
--
This is the IBMi Open Source Roundtable (OpenSource) mailing list
To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/opensource
or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/opensource.

--
This is the IBMi Open Source Roundtable (OpenSource) mailing list
To post a message email: OpenSource@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/opensource
or email: OpenSource-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/opensource.

[https://www.medtronsoftware.com/img/MedtronMinilogo.bmp] Kevin Bucknum
Senior Programmer Analyst
MEDDATA / MEDTRON
120 Innwood Drive
Covington LA 70433
Local: 985-893-2550
Toll Free: 877-893-2550
https://www.medtronsoftware.com

CONFIDENTIALITY NOTICE

This document and any accompanying this email transmission contain confidential information, belonging to the sender that is legally privileged. This information is intended only for the use of the individual or entity named above. The authorized recipient of this information is prohibited from disclosing this information to any other party and is required to destroy the information after its stated need has been fulfilled. If you are not the intended recipient, or the employee of agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or action taken in reliance on the contents of these documents is STRICTLY PROHIBITED. If you have received this email in error, please notify the sender immediately to arrange for return or destruction of these documents.