Re: InzTap failing -- MIDRANGE-L

Troy,
Getting back to the OP's situation. Focusing on Jerry's question. Ok?
Let's stick with that.
Jerry is saying that when he prompts INZTAP, on his 7.4 system, that
*ULTRIUM5 is not a valid option for the DENSITY parameter. At this time,
the command doesn't know the device type, what kind of VTL you have, etc.
So, whether or not he is on a local or cloud system, has a local VTL or a
cloud VTL, or even has a VTL or a physical library do not matter.
*ULTRIUM5 still isn't a valid option for the DENSITY parameter.
CPD0084: '*ULTRIUM5 ' not valid for parameter DENSITY.

Which is odd, since is *QIC120 really still an option at 7.4?

Where can one find the valid combinations?
Where can one see that *ULTRIUM5 is not supported? I know there's a place
which used to show this, and this is why I changed my density some time ago
but I'll be danged if I can find it anymore.

https://www.ibm.com/support/pages/ibm-i-removable-media-tape-and-tape-library-devices

On Tue, Mar 11, 2025 at 11:18 AM Troy Foster via MIDRANGE-L <
midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

Because they changed the tape library device description(s) when they
changed the VTL.
They had to delete and recreate all of the device descriptions.
We are using BRMS. It was done when we went to the cloud.
We never changed the way that we were doing backups.
Did it 2 years ago.

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob
Berendt
Sent: Tuesday, March 11, 2025 10:10 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: InzTap failing

Caution: This is an external email. Please take care when clicking links
or opening attachments. When in doubt, contact your IT Department

Troy,
What kind of VTL you have has zero effect on what the options are on F4 or
? to prompt for the DENSITY parameter. Try leaving the device blank on
INZTAP and hitting F4 on the DENSITY parameter.

On Tue, Mar 11, 2025 at 11:04 AM Troy Foster via MIDRANGE-L <
midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

That happened to our system.
We have our system in the cloud and the company that is hosting our
system moved the VTL to new VTL and didn't check the actual setting on

our system.

They set it to *ultrium7.
They did a read not a INZTAP, you can read back 2 levels but can not
write
2 levels. They also did not notify us of the change.
I would check with whoever set up the VTL.

Ok, this makes NO sense.

Yesterday the system went down hard.
An outside company was going to do a fire alarm testing and threw the
wrong breaker and brought down the data center!!!
WTH?!?!?!

Networks, IBMi, phones, UPS. Everything.

We use a VTL for out nightly backups.
Part of the backup does a INZTAP and has *ULTRIUM5 in Density as that
is what we had and still have as needed for a physical tape.

The INZTAP failed last night saying it is an invalid density. NOTHING
has changed.

Why in the H....eck would this fail now?

When I do an INZTAP and put ? in the Density, *ULTRIUM5 is not listed.

We are at 7.4 and IPL the box every 4 weeks. Last IPL was 2 weeks ago,
except for yesterday's debacle.

Subject to Change Notice:

WalzCraft reserves the right to improve designs, and to change
specifications without notice.

Confidentiality Notice:

This message and any attachments may contain confidential and
privileged information that is protected by law. The information
contained herein is transmitted for the sole use of the intended

recipient(s) and should "only"

pertain to "WalzCraft" company matters. If you are not the intended
recipient or designated agent of the recipient of such information,
you are hereby notified that any use, dissemination, copying or
retention of this email or the information contained herein is
strictly prohibited and may subject you to penalties under federal
and/or state law. If you received this email in error, please notify
the sender immediately and permanently delete this email. Thank You

WalzCraft PO Box 1748 La Crosse, WI, 54602-1748 www.walzcraft.com<
http://www.walzcraft.com> Phone: 1-800-237-1326
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.