Re: Multinpe interfaces - how can I have a default route for different interfaces

Thanks Jim,

I don't know what I was doing when I used option 1 from the work with
TCP/Ip routes but when I used the addtcprte command it just added the
route.

Work with TCP/IP Routes
System:
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display

Route Subnet Next Preferred
Opt Destination Mask Hop Interface

*DFTROUTE *NONE 10.95.239.254 *NONE
*DFTROUTE *NONE 172.16.0.1 172.16.0.200


Cheers

Don





From: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion"
<midrange-l@xxxxxxxxxxxxxxxxxx>
Date: 09/02/2023 01:12 AM
Subject: Re: Multinpe interfaces - how can I have a default route
for different interfaces
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxxxxxxxx>



We've been doing this for years.

See:
Work with TCP/IP Interfaces
Sy
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display 9=Start 10=End

Internet Subnet Line Line
Opt Address Mask Description Type

127.0.0.1 255.0.0.0 *LOOPBACK *NONE
172.29.250.15 255.255.255.0 ETHLIN *ELAN
172.29.250.70 255.255.255.0 ETHLIN *ELAN
192.168.10.2 255.255.255.0 ETHLIN *ELAN


Now the extra route:

Work with TCP/IP Routes
System: V7R3
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display

Route Subnet Next Preferred
Opt Destination Mask Hop Interface

*DFTROUTE *NONE 172.29.250.1 *NONE
*DFTROUTE *NONE 192.168.10.1 192.168.10.2

Can be the same Ethernet port or another, no matter.

Now the traffic will go out the intended port.


--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On Wed, Feb 8, 2023 at 3:35 AM Patrik Schindler <poc@xxxxxxxxxx> wrote:

Hello Jim,

Am 08.02.2023 um 01:56 schrieb Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx>:

Then you need a default route for each line, and I would add the

preferred

interface on the second one.

I'm curious how this can work at all as intended. See my in-detail
explanation in this thread.

:wq! PoC



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.