I have a bag full of square wire nuts, I carry with me for just that reason.
Got them at GreyBar.
The ones that have posts that stick through the rack, you will need the
adapters for.
Time to internet serf....
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob
Berendt
Sent: Tuesday, March 3, 2020 1:30 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: If your rack has square mounting holes, use the larger rail
pins that are provided with the rack installation kit.
I also have two 5887 disk expansion units for my older 8286-41A which have
this same issue:
https://www.ibm.com/support/knowledgecenter/POWER8/p8ee3/p8ee3_5887_install_
rail_assembly.htm
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob
Berendt
Sent: Tuesday, March 3, 2020 2:22 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: If your rack has square mounting holes, use the larger rail pins
that are provided with the rack installation kit.
I am moving a EMX0 expansion unit from a rack with round holes to a rack
with square holes.
We recently cleaned our computer room and pitched a bunch of stuff.
Does anyone have: "If your rack has square mounting holes, use the larger
rail pins that are provided with the rack installation kit." noted at
https://www.ibm.com/support/knowledgecenter/POWER9/p9egp/p9egp_emx0_install_
rail_assembly.htm
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
midrange.com
