× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I am having an issue seeing virtual optical drives created on my host lpar of IBM i on my guest lpars of IBM i.
I am told they should just automatically appear.

One of the things IBM had me check was that QAUTOCFG was enabled on the guest.

They also had me delete any existing virtual optical drives on the guest pointing to the host as potential conflicts.

IBM also had me go to the host and run
WRKNWSD guestname*
Only one should have
Allowed device resources . . . . ALWDEVRSC *UNRSTD
Restricted device resources . . RSTDDEVRSC *NONE
The others should have:
Allowed device resources . . . . *UNRSTD
Restricted device resources . . *ALLOPT
To change these you should
- power off the guest.
- vary off the appropriate NWSD's
- make the changes.
- vary on the NWSDs
- Start the guest

IBM also said that if you ever want to do an OS upgrade from these optical drives, and therefore need to boot from it, then you should do the following
- change your guest's partition profile on the HMC to change the Tagged I/O's Alternate Restart Device to where the optical drives are served up. On this lpar it happens to be the same as the load source drive.
- activate the guest from profile
- disable any other alternate installation devices you may have created (like the tape drive you originally restored this lpar from) using the steps "Disabling an alternate installation device" found at https://www.ibm.com/support/knowledgecenter/ssw_ibm_i_73/rzarm/sc415304.pdf

I followed these steps. I also deleted and recreated the virtual optical drives on the host to serve up these image catalogs. However I do not see any new optical drives on the guest. Help.

Also:
Should I change all NWSDs to
Restricted device resources . . *ALLOPT
And create a new NWSD just for optical only? This is one way to differentiate between load source and optical. This would also entail changing the guest lpar profile to tag this new nwsd as the alternate restart device.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.