×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
Rob,
Do you have access to any of the paper work from your previous P8s.
The SSD feature would be included there if your BP sends you the .csv or .rtf files.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Tuesday, July 10, 2018 11:11 AM
To: Midrange Systems Technical Discussion
Subject: RE: Is this Power 9 GA2 firmware?
What I've currently running on Power 9 are these SSD's:
Type. . . . . . . . . . . . : 5B11
Model . . . . . . . . . . . : 109
Level . . . . . . . . . . . : 2
Resource Name . . . . . . . : DMP067
RAID 5/Active
Hot spare
Leaving the size of each disk at 727418.
According to
https://www.ibm.com/support/knowledgecenter/ca/POWER8/p8ecs/p8ecs_drive_parts.htm
These are 775GB drives at 4k block size.
These are newer drives than the ones I want to resurrect. Perhaps they
were left out since they were already there? Or perhaps because I have
them in newer expansion units?
But I will research them. Harder to look up the numbers on the old drives
since they are totally uncabled and powered off. Hmm, physically inspect?
Rob Berendt
midrange.com
