Hi Rob
Are you talking about
RCLSTG SELECT(*DIR)
Alan Shore
E-mail : ASHORE@xxxxxxxx
Phone [O] : (631) 200-5019
Phone [C] : (631) 880-8640
'If you're going through hell, keep going.'
Winston Churchill
-----Original Message-----
From: Alan Shore
Sent: Friday, May 04, 2018 11:38 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: Size of an ifs directory
Sorry - we are NOT using custom menuing system When I type SLTCMD RCL* And presenter - it displays ALL the RECLAIM commands RCLACTGRP
RCLAPPN
RCLDBXREF
RCLDDMCNV
RCLDLO
RCLLIB
RCLLNK
RCLOBJOWN
RCLOPT
RCLRPTRDAR
RCLRSC
RCLSPLSTG
RCLSTG
RCLTMPSTG
RCLACTGRP
RCLDDMCNV
RCLRSC
RCLSTG
Now what?
Alan Shore
E-mail : ASHORE@xxxxxxxx
Phone [O] : (631) 200-5019
Phone [C] : (631) 880-8640
'If you're going through hell, keep going.'
Winston Churchill
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Friday, May 04, 2018 11:27 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: Size of an ifs directory
Ok, looks like you're using a custom menuing system with it's own command line. In that case you'll have to try SLTCMD RCL* Be very careful not to have your finger slip and hit the D key instead of the S key. They are right next to each other.
If that fails, let me know and I'll just tell you the answer.
If you give a man a fish he eats for a day, If you teach a man to fish he eats for a lifetime.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Alan Shore" <ashore@xxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Date: 05/04/2018 11:18 AM
Subject: RE: Size of an ifs directory
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
I typed in
RCL*
And pressed Enter
Generic command name not allowed.
Is displayed
Alan Shore
E-mail : ASHORE@xxxxxxxx
Phone [O] : (631) 200-5019
Phone [C] : (631) 880-8640
'If you're going through hell, keep going.'
Winston Churchill
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Friday, May 04, 2018 11:15 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: Size of an ifs directory
What do you see when you type in
RCL*
and hit enter?
Of course you're spending $100 on $0.05 of disk space.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Alan Shore" <ashore@xxxxxxxx>
To: "midrange-l@xxxxxxxxxxxx" <midrange-l@xxxxxxxxxxxx>
Date: 05/04/2018 11:11 AM
Subject: Size of an ifs directory
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Hi everyone
Before I forget - we are on V7r1
We are in the process of cleaning up the files on our ifs
When I use edtf '/' and page down to particular directories, then take an
option 6 (Path size), it displays the size of the ifs directory and the
number of SUBDIRECTORIES and FILES within that directory
However - we have a directory that has SUBDIRECTORIES = 0, FILES = 0
But the size of the directory is 5,292K
Does that make sense to anyone?
Is there a command to run against that directory to reorg it and free up
that space (like RGZPFM but for ifs directories)
Alan Shore
E-mail : ASHORE@xxxxxxxx
Phone [O] : (631) 200-5019
Phone [C] : (631) 880-8640
'If you're going through hell, keep going.'
Winston Churchill
midrange.com
