× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi

STRTCPSVR SERVER(*SNMP) will start the server if it is not running.

You should be able to see the port open and listening using NETSTAT option
3 (my notes tell me WRKTCPSTS OPTION(*CNN) will get this display). On V7R1
you should see a state of *UDP on the snmp port (161)

The jobs on V7R1 areQTMSNMPRCV and QTMSNMP; don;t know if they have changed
them for V7R3

There were changes at V7R3 that might be relevent; from the V7R2 memo to
users:

"In 7.2, the Simple Network Management Protocol (SNMP) server is enforcing
stricter compliance to the SNMP version 3 (SNMPv3) protocol. The SNMP
server will not start if the SNMP attributes have been configured to allow
SNMPv3 and a non-RFC compliant SNMP Engine ID is specified by the SNMP
attributes. The QTMSNMP job will log message TCP403B (Local SNMP engine ID
not valid. Reason code &1.) and then end. If SNMPv3 is not enabled the
messageTCP403B will still be logged, however, the QTMSNMP job will not end.
To set a valid SNMPv3 Engine ID, run the following command: CHGSNMPA
SNMPENGID(*SYSGEN)"



On Thu, Sep 21, 2017 at 7:22 AM, Justin Taylor <JUSTIN@xxxxxxxxxxxxx> wrote:

I'm unfamiliar with that server, so I took it to Google.

That "Common Information Model", which is a User-Defined server. iNav
shows it's running (confirmed by WRKACTJOB). I went thru the
troubleshooting (https://www.ibm.com/support/knowledgecenter/ssw_ibm_i_73/
rzatl/rzatltrouble.htm) and didn't find any obvious problems.



-----Original Message-----
From: Jack Woehr [mailto:jwoehr@xxxxxxxxxxxxxxxxxxxxxxxx]
Sent: Wednesday, September 20, 2017 1:45 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: SNMP & 7.3

STRTCPSVR *CIMOM

?


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.