× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. March 2017

RE: DMPCLPGM - no output?

Works fine for V7R1.

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Paul Therrien
Sent: Friday, March 17, 2017 10:38 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: DMPCLPGM - no output?

I ran a simple cl with the DMPCLPGM and I still get nothing.
... I am going to read the link you gave me just a little bit more carefully.


Paul


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Paul Therrien
Sent: Friday, March 17, 2017 10:32 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: DMPCLPGM - no output?

Yeah, I was just reading the link you gave me and it seemed that ...

-To obtain a CL dump, complete one of the following tasks:
-Run the Dump CL Program (DMPCLPGM) command. This command can only be used in a CL program or CL procedure and does not end the CL program or CL procedure.

...would be enough.

I am going to try a simple CL like yours and see if that works. I am wondering if being in a MONMSG block is somehow preventing the DMPCLPGM from performing as expected.


Paul


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Friday, March 17, 2017 10:09 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: DMPCLPGM - no output?

I did read that wrong. I missed "one of the following".

This worked as intended on a 7.3 lpar with latest cume and groups

pgm
dcl &myvar *char 5
chgvar &myvar 'a'
dmpclpgm
endpgm

Variable Type Length Value
&MYVAR *CHAR 5 'a

Value in Hexadecimal
* . . . + . . . . 1
8140404040



Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Rob Berendt <rob@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 03/17/2017 10:03 AM
Subject: Re: DMPCLPGM - no output?
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



I may have read that wrong...


Rob Berendt

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.