× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Could it be because your userid is in UPPERCASE here? Maybe the Win7 box only allows lowercase?

Or maybe Windows is requiring a level of encryption that you don't have on IBM i?


On 3/2/2017 2:38 PM, Jeff Crosby wrote:
We generate BRMS recovery reports but don't print them. Instead PDF copies
are put on the IFS. Then we copy the PDFs from the IFS to a W2008 server.

I'm wanting to change that and copy them to my workstation (Win 7 Pro
64-bit) instead. Can't get it to work. I get the following error in the
joblog:

Additional Message Information



Message ID . . . . . . : CPDB053

Date sent . . . . . . : 03/02/17 Time sent . . . . . . :
15:20:32


Message . . . . : Error exchanging security information for user JEFF on

network server JLCROSBY.



Cause . . . . . : The IBM i NetClient (QNTC) file system has encountered
an
error when authenticating user JEFF with a network server JLCROSBY.

Recovery . . . : Ensure the following:

- The user is set up on network server JLCROSBY.

- The IBM i user password matches the network server user password.

- Network server JLCROSBY is enabled for digitally signed
communications.
Technical description . . . . . . . . : An error has been detected while
the
QNTC file system was exchanging security information with a network
server.
The error class was 1, and the error code was 5.

Possible error class and error code values include:


Class 0 - QNTC file system specific security error.
1 - QNTC file system requires digital signing.
Class 1 - Network server operating system related error.
1 - Not valid Function.
2 - File not found.
3 - Directory not valid.
4 - Too many files open.
5 - Access denied.
Class 2 - Error generated by the network server.
1 - Non-specific error code.
2 - Bad password.
3 - Directory not valid.
4 - Access denied.
7 - Not valid device.
Class 3 - Network server hardware error.
31 - General hardware failure.
39 - No space on file system.

1) My IBM i password and Windows domain password are the same.
2) "Everyone" has full control on the share from my workstation
3) "Everyone" has full control to the folder on my workstation the share
points to

Is it because user JEFF is a domain user and not a local user? Wouldn't
seem so to me.

But I've felt dense this entire week. Ideas?

Thanks.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.