Re: OPT1481 - Add optical disk cartridge failed to complete successfully

[DrFranken <midrange@xxxxxxxxxxxx>]

Well Frankie had that many when the SCSI address on the Optical drive 
was set incorrectly. Sadly they all were the same PHYSICAL drive so 
insering a disk and closing the drawer caused that media to appear in 
every drive. It then ejected immediately because all but one were 
duplicates.

So I might surmise that you have an optical drive problem here. Can you 
look at them to see if they have the same serial numbers by chance?


        - Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 9/29/2016 3:05 PM, Steinmetz, Paul wrote:
> Receiving hundreds of OPT1481 - Add optical disk cartridge failed to complete  successfully
> For devices OPT01 thru OPT11.
>
> Recovery  . . . :   Ensure that optical device OPT02 is varied on and try the
>   request again. You may need to eject the cartridge and re-load it.
>
> What is causing this?
> How do I resolve?
> I don't have this many OPT devices.
> What created these.
>
>
> OPTVRT01          ACTIVE
> OPT01             VARIED OFF
> OPT02             ACTIVE
> OPT03             ACTIVE
> OPT04             ACTIVE
> OPT05             ACTIVE
> OPT06             ACTIVE
> OPT07             ACTIVE
> OPT08             ACTIVE
> OPT09             ACTIVE
> OPT10             ACTIVE
> OPT11             ACTIVE
>
> Thank You
> _____
> Paul Steinmetz
> IBM i Systems Administrator
>
> Pencor Services, Inc.
> 462 Delaware Ave
> Palmerton Pa 18071
>
> 610-826-9117 work
> 610-826-9188 fax
> 610-349-0913 cell
> 610-377-6012 home
>
> psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
> http://www.pencor.com/