×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
If you use the TRCCNN command on IBM i you can output to a STMF in WireShark format. That way you don't have to connect the PC and use WireShark to trace. Here's a link to an article on how to use TRCCNN:
http://www.itjungle.com/fhg/fhg030514-story02.html
The answer to your second question is it depends on whether your traffic between the partitions goes through an Ethernet adapter or if it goes over the virtual Ethernet. That's the good thing about TRCCNN, it works either way.
Respectfully,
Kendall Kinnear
System Analyst
Standard Motor Products, Inc.
Work: 972-316-8169
Mobile: 940-293-7541
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of David Gibbs
Sent: Thursday, July 21, 2016 3:12 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Packet capture between two LPAR's?
Folks:
Any tricks to do a TCP/IP packet capture (with a tool like Wireshark) between to partitions on a single system?
Would the traffic go through a managed switch even though both partitions are on the same system?
Thanks!
david
--
David Gibbs
midrange.com
* IBM Power Systems Champion
IBM i on Power Systems: For when you can't afford to be out of business!
I'm riding 50 miles in the Hawaii Tour de Cure to raise money for diabetes research, education, awareness, and advocacy.
Make an investment in a diabetes free future by donation. Visit
https://urldefense.proofpoint.com/v2/url?u=http-3A__main.diabetes.org_goto_aloha16&d=DQICAg&c=CBjl-DmyMmSeXzqzAOY98w&r=pOvNBD1fQ8EIsnWxCJIvLGGO-zLgOpZ92efsKAWQMBM&m=VFNJEePgYNDU1pTkez0u8-7iIY9l3XwkcUV20Cs6o0k&s=lS630AM54NSkJ7P73XCHMfMoNLLoGHjHPxIqzEi0tMk&e= to make a tax deductible donation.
I may have diabetes, but diabetes doesn't have me!
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.midrange.com_mailman_listinfo_midrange-2Dl&d=DQICAg&c=CBjl-DmyMmSeXzqzAOY98w&r=pOvNBD1fQ8EIsnWxCJIvLGGO-zLgOpZ92efsKAWQMBM&m=VFNJEePgYNDU1pTkez0u8-7iIY9l3XwkcUV20Cs6o0k&s=OlyItvGI6t31nOGlfJznA_LEZmIyC4DVcFyvEUPJK9M&e=
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
https://urldefense.proofpoint.com/v2/url?u=http-3A__archive.midrange.com_midrange-2Dl&d=DQICAg&c=CBjl-DmyMmSeXzqzAOY98w&r=pOvNBD1fQ8EIsnWxCJIvLGGO-zLgOpZ92efsKAWQMBM&m=VFNJEePgYNDU1pTkez0u8-7iIY9l3XwkcUV20Cs6o0k&s=WfEa7e38y9iN7CliMti93msmdG_QtlsFvdMnloeXDwM&e= .
Please contact support@xxxxxxxxxxxx for any subscription related questions.
________________________________
Please consider the environment before printing this email.
The content of this e-mail (including any attached files) is confidential and may be privileged and protected by law. It is intended solely for the purpose of the person to whom it is addressed. If you are not the intended recipient of this message, please notify the sender immediately and delete the message (inclusive of any attached files). In addition, if you are not the intended recipient of this message, any disclosure, copying, distribution or taking any action in reliance of the contents of this email is strictly prohibited.
midrange.com
