RE: AFP Overlay in landscape - margin issue

The offsets are (0 0) for the front overlay. It was created in Word as a landscape page. It does print fine if printed directly from the outq to a physical printer. But, CPYSPLF *TOSTMF *PDF is where it has an issue. IBM is looking into it. I've tried various page rotations and that does not help.



-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of wscott@xxxxxxxxxxxxx
Sent: Monday, June 06, 2016 7:13 AM
To: Midrange Systems Technical Discussion
Subject: Re: AFP Overlay in landscape - margin issue

Your AFP page has two origins. Unfortunately the origin for the text is the only one that gets moved with PAGRTT. So for TEXT you have a landscape page, but for GRAPHICS you have a portrait page. i.e. your across is still
8.5 inches and your down is 11. Just give it a quick try, flip your original across and down positions for the graphic.

If you are developing a new app, I recommend making your page size the orientation that you need to print the bulk of the page. i.e. Make a landscape page of 11 x 8.5 and avoid the use of PAGRTT.

If this is still too confusing, please give me a call.



William Scott
Advisor, Solutions Engineering
Canon Solutions America, Inc.
5600 Broken Sound Blvd., Boca Raton, FL 33487 www.csa.canon.com wscott@xxxxxxxxxxxxx T 561.997.3256






From: Roger Harman <roger.harman@xxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 05/26/2016 02:45 PM
Subject: AFP Overlay in landscape - margin issue
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



I'm trying to overlay a logo on a landscape report. I've done this fine in portrait before.


For some reason, the logo is not printing at the top of the page but a
couple of inches down. I've tried a number of combinations but can't get
it to flush up to the top margin.


The overlay was created in MS-Word using the 600dpi AFP driver. Page was
landscape and the graphic placed centered at the top margin.


Here's the OVRPRTF (in the RPG):

CmdStr = 'OVRPRTF FILE(EWS305PT) DEVTYPE(*AFPDS) '
+ 'PAGESIZE(66 132) OVRFLW(62) PAGRTT(90) '
+ 'FRONTOVL('
+ %trim(Logo) // Logo is a 10-char name
+ ') OVRSCOPE(*JOB) HOLD(*YES)';


Suggestions??


TIA......


Roger Harman

COMMON Certified Application Developer - ILE RPG on IBM i on Power