Re: SRC 11007620

In my experience i've had only 1 bad fan (and it was enough to bring down
the machine, it somehow shorted the PSU enough to bring it down). The rest
have been loose fittings between fan and assembly or between the assembly
and the backplane. I would first re-seat all those components and only then
change a fan...
Otherwise the SRC points to the middle fan (76X0 where X is the FAN
position).


Roberto

On Tue, May 19, 2015 at 6:22 PM, Dan <dan27649@xxxxxxxxx> wrote:

11007620 Fan Fault
The fan is operating at the wrong speed. Ensure the fans, and fan tray are
fully seated into the fan connectors. Follow the instructions for the items
listed in the FRU list:
AIRMOVR
TWRCARD

On Tue, May 19, 2015 at 5:07 PM, Guy Terry <guy_terry@xxxxxxxxxxx> wrote:

If you were going to look at a 9406-520 whose attention light was on, and
was showing the SRC 11007620, what would you put your money on as being

the

problem?
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.