Re: QM Query report prints with smaller font

Sam

On 5/12/2015 1:01 PM, Gary Thompson wrote:

I created a QM query and form which I want to print on standard 8.5 x 11 using a typical laser,
which is a >Laser Jet 600 M602< in my department.

I started with the following over-ride:

       OVRPRTF FILE(QPQXPRTF) PAGESIZE(66 84) LPI(6)   +
               CPI(10) OVRFLW(60) FONT(*CPI) PAGRTT(0) +
               USRDTA(SMP925C)


The first query manager form that printed, printed at 6 LPI x 10 CPI, which I need for readability.

As I changed column headings and page headings/footings, the report began printing at about 6 lpi x 15 cpi ?

(6 lpi >is< the lines per inch but the font is >narrower< than 15 cpi)

I then changed to a minimal over-ride:

        OVRPRTF FILE(QPQXPRTF) USRDTA(SMP925C)

That produced the same reduced-font report.

DSPF shows:
                                                        Display Spooled File
File  . . . . . :   QPQXPRTF
Control . . . . .
Find  . . . . . .
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
Settlement Location: 9     Delivery Date: 04/29/2015
                            ASN Document Number Report
                                                 Del.
Outlet Number  Outlet Name         ASN Number   Loc.  Route
-------------  ------------------  -----------  ----  -----------
       1102030  A-STORE XX #0001    11020300191  09    11301
       1102249  B-STORE XX #0002    11022490309  09    12302
       1156746  C-STORE XX #0003    11567460242  09    10301
       1156806  D-STORE XX #0004    11568060310  09    10301
       1158411  E-STORE XX #0005    11584110167  09    11401
Query: BASLOC53/SMP925QM
05/12/15 08:38:09                                                       1
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8

The Settlement Location value is from a six character field.

The last line in the DSPF snip is the default QM page footing, which I don't
know how to change/eliminate, but because it's the longest line, I wonder if
that causes the use of a smaller font ?

Any advice as to how to get my report to print at 10 CPI is most welcome - thanks all!