×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
I recently was verifying my class entries for my various subsystems.
We don't start QINTER or QBATCH, we have custom for both.
All my interactive subsystems use either QINTER class or a copy of QINTER, Default wait time set to 30.
However, in all our batch subsystems, I'm seeing a class with Default wait time of 30, normally batch is 120.
Decades ago, I'm not sure if this was an oversight, or if someone determined that Default wait time for batch should be 30 instead of 120.
I recently had a BRMS batch job fail, failure was a timing issue, probably would not have failed if was set to 120.
Any thoughts from the group on what batch default wait time should be?
Default wait time
Shows the maximum wait time (in seconds) that a thread in the job
waits for a system instruction, such as the lock machine interface
(MI) instruction, to acquire a resource. This default wait time is
used when a wait time is not otherwise specified for a given
situation. Normally, this would be the amount of time the system
user would be willing to wait for the system before the request is ended.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
