Rob,
Yes.
CALL PGM(QBRM/Q1AOLD) PARM('PARMOVR' '*DISPLAY' 'ASYNCBRING'
ASYNCBRING:.
I turned ASYNCBRING off, this is now what I see.
So according to the display you are currently off.
If you turn it on, should appear as below.
CALL PGM(QBRM/Q1AOLD) PARM('PARMOVR' '*DISPLAY' 'ASYNCBRING')
ASYNCBRING: *YES.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, February 04, 2015 7:18 AM
To: Midrange Systems Technical Discussion
Subject: RE: Added 39.6GB file to backup, time only grew 4 minutes.
You mean like this snippet from my earlier email?
<snip>
CALL PGM(QBRM/Q1AOLD) PARM('PARMOVR' '*DISPLAY' 'ASYNCBRING') ASYNCBRING:.
</snip>
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 02/03/2015 04:48 PM
Subject: RE: Added 39.6GB file to backup, time only grew 4 minutes.
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Rob,
When you run this command do you see *YES or *NO
CALL PGM(QBRM/Q1AOLD) PARM('PARMOVR' '*DISPLAY' 'ASYNCBRING')
ASYNCBRING: *YES.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Tuesday, February 03, 2015 9:16 AM
To: Midrange Systems Technical Discussion
Subject: RE: Added 39.6GB file to backup, time only grew 4 minutes.
http://www-01.ibm.com/support/docview.wss?uid=nas8N1011242
CALL PGM(QBRM/Q1AOLD) PARM('PARMOVR' '*DISPLAY' 'ASYNCBRING') ASYNCBRING:.
Comparing that with the BRMS flight recorder and it doesn't look like we
are using that.
02/02/15 22:59:50.741 724038 ROB q1aOL
q1aCallQsrSaveApi::q1aCallQsrSaveApi
- Here is the command: QSYS/SAV DEV('/QSYS.LIB/TTAPKVL01.DEVD')
OUTPUT('/tmp/brms/
q1asav724038') INFTYPE(*ALL) CHGPERIOD(*ALL *ALL ) PRECHK(*NO)
CLEAR(*NONE)
DTACPR(*DEV) COMPACT(*DEV) USEOPTBLK(*YES) UPDHST(*YES) TGTRLS(*CURRENT)
PVTAUT(*NO)
SEQNBR(*END) EXPDATE(030915) ENDOPT(*LEAVE) SAVACT(*YES) SAVACTMSGQ(*NONE)
SYNCID(*NONE ) ASPDEV(*ALLAVL)
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'midrange-l@xxxxxxxxxxxx'" <midrange-l@xxxxxxxxxxxx>
Date: 02/03/2015 08:41 AM
Subject: RE: Added 39.6GB file to backup, time only grew 4 minutes.
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Rob,
Are you using ASYNCBRING, default is *NO.
You may see even faster results.
My entire IFS save is only 5 minutes, LTO5 fiber.
https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20i%20Technology%20Updates/page/Achieve%20faster%20IFS%20save%20times%20using%20SAV%20with%20ASYNCBRING
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Tuesday, February 03, 2015 8:22 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Added 39.6GB file to backup, time only grew 4 minutes.
Added a 39.6GB stream file to our backup. The save time only grew four
minutes. Yes, I am rather fond of fiber LTO4 drives.
Rob Berendt
midrange.com
