I had this error occur over the weekend, during a DUPMEDBRM.
The Dup failed, and the recovery.
TAPMLB01 then recovered with no operator intervention.
Following DUPMEDBRM, and saves were successful.
Has anyone ever experienced this issue?
Message ID . . . . . . : CPP6316
Date sent . . . . . . : 02/01/15 Time sent . . . . . . : 06:10:20
Message . . . . : Hardware configuration change detected.
Cause . . . . . : Device *N has reported an error that indicates that the
configuration may have been changed without the IOP being reset. There may
also be a hardware problem with the device.
Recovery . . . :
Reset the IOP. If the problem continues press F14 to work with the
problem.
Technical description . . . . . . . . :
IOP resource . . . . . . . . . . . . : CMB03
IOA resource . . . . . . . . . . . . : DC02
Device type . . . . . . . . . . . . . : 3573
Reference code . . . . . . . . . . . : X'9220'
Error log ID . . . . . . . . . . . . : X'8021F782'
Problem log ID . . . . . . . . . . . : 1503221191
Message ID . . . . . . : CPF414C
Date sent . . . . . . : 02/01/15 Time sent . . . . . . : 06:10:21
Message . . . . : Command not allowed
Cause . . . . . : Library device TAPMLB01 is not in library mode.
Recovery . . . : Switch library device TAPMLB01 to library mode and retry
the operation.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
