RE: Disk configuration

No tools? That's weird. Back in the day, the CE's even carried soldering
irons. I once watched a CE solder a piece of a paper clip across some
contacts on a bad circuit board on a S/38 as a temporary fix.

Rochester had had some quality control issues with a batch of boards, and
that was the published fix. Sounds like something Dr. Franken would try.
:-)

Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of John
McKee
Sent: Wednesday, January 07, 2015 5:19 PM
To: Midrange Systems Technical Discussion
Subject: Re: Disk configuration

When CE arrived, he brought no tools. Tried different ideas to get battery
clip off the card. Finally just pushed old battery out. No ESD strap.
Guess we were lucky.

Remote site does have pc people. That, of course, is not stating they
actually work on pc hardware. What I have seen for pc techs is install
software, maybe replace hard drive or network card. Didn't >look< hard to
do, but not something I would have wanted to do sight unseen - no spirit of
adventure.

John McKee

On Wed, Jan 7, 2015 at 4:30 PM, Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx

wrote:

That machine only showed one RAID card which I'll bet was the 5709. That
is not hot swappable. You'll very likely blow up the backplane along with
any cards that are attached to the backplane If you remove that card while
the machine has power attached to it. (I've seen it done twice by 3rd
party maintenance companies) When that happens it's very expensive to
replace all the parts, and it's most likely reload time.

With that controller, power down, unplug power supplies, open front cover,
pull it from the front. Remember your ESD strap while you're at it.
Change the batteries (not cheap batteries either) and replace the card.
Plug in, wait for FSP to finish booting and then start the partition with
an HMC, or wait for the partition to come up with LAN console.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
John.BresinaJr
Sent: Wednesday, January 07, 2015 3:31 PM
To: Midrange Systems Technical Discussion
Subject: RE: Disk configuration

System
Name

Processor
Feature
QPRCFEAT

Software
Tier

Processor
n-way

Total
Processor
CPW

Contracted
5250 CPW
Interactive

520_0902_7459

7459

P10

1

1000

1000


If all the drives are running in a degraded status then the raid cache
battery is dead. I have seen this on older machines I used to have and
performance went in the tank when we were in that state. On the 520's I
think they had hot swappable batteries on the raid cards. However you
would need access to SST to change them out.



John



John Bresina Jr | Sr Engineer | TTS Server Tech - Tandem/System
i/Mainframe | Target | Mailstop: NCE-0706 | 7000 Target Parkway North |
Brooklyn Park, MN 55445| 612 304 3665 (ph)





-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
John McKee
Sent: Wednesday, January 07, 2015 2:56 PM
To: Midrange Systems Technical Discussion
Subject: Re: Disk configuration



That was simple. Thanks.



Remote QPRCFEAT is 7459

Local is 7735



Does that have any significance? Or, can that explain some system
slowness beyond cache battery dead?



John



On Wed, Jan 7, 2015 at 2:50 PM, Luis Rodriguez <luisro58@xxxxxxxxx<mailto:
luisro58@xxxxxxxxx>> wrote:

John,

DPY= Raid / MIRR=Mirrored

There is no Save Spool under V5R3.

HTH,

Luis

Luis Rodriguez

IBM Certified Systems Expert - eServer i5 iSeries

--

On Wed, Jan 7, 2015 at 4:14 PM, John McKee <jmmckee@xxxxxxxxxxxxxx

<mailto:jmmckee@xxxxxxxxxxxxxx>> wrote:

I have been asked, by somebody who is also being leaned on, for

information

on this remote 520.

I can answer OS level.

But, without SST access (also no Q SECOFR access), how can I

determine

how disks are organized? Specific question was whether disks are

Raided

or

Mirrored.

WRKDSKSTS shows this (manally keyed):

Unit Type % Used

1 4326 87.3

2 4326 92.0

3 4326 92.2

4 4327 87.2

5 4327 87.2

6 4326 92.0

7 4327 87.2

8 4327 87.2

F11 shows all drives are in ASP 1, DPY, and DEGRADED

System is v5r3

No maintenance contract.

And, just a bonus - one output queue has, (ready for this): 171203

files, some dating back to 2007.

No idea how they have Robot set up. I looked tis morning, as I did

backup

of local system, and GO SAVE 21, by default, does not save spool

files.

I thought there was a command that showed more about disk

configuration that did not require either SST or QSECOFR. Maybe I am

dreaming.

I had the opportunity to listen on to a phone conference about

"master plans" for decommissioning of these and other systems.

Everybody on the call was in the same boat - uppers applying

pressure. Not fun even to listen to.

Thoughts appreciated.

John McKee

--

This is the Midrange Systems Technical Discussion (MIDRANGE-L)

mailing

list

To post a message email:
MIDRANGE-L@xxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxx> To
subscribe,

unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email:
MIDRANGE-L-request@xxxxxxxxxxxx<mailto:MIDRANGE-L-request@midrange.c
om> Before posting, please

take a moment to review the archives at

http://archive.midrange.com/midrange-l.

--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list To post a message email:
MIDRANGE-L@xxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxx> To subscribe,

unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email:
MIDRANGE-L-request@xxxxxxxxxxxx<mailto:MIDRANGE-L-request@xxxxxxxxxxxx

Before posting, please take

a moment to review the archives at

http://archive.midrange.com/midrange-l.

--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx<mailto:
MIDRANGE-L@xxxxxxxxxxxx> To subscribe, unsubscribe, or change list
options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx<mailto:
MIDRANGE-L-request@xxxxxxxxxxxx> Before posting, please take a moment to
review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.