× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



When I work with hardware resources for storage, I see this:

Resource Type-model Status

CMB01 2844-001 Operational

DC04 5702-001 Not detected

DC03 2749-001 Not detected

DC05 571A-001 Operational

CMB02 286D-001 Operational

DC01 2757-001 Operational

CMB03 268C-001 Operational

DC02 6B02-001 Operational



The 2749 we can already discount as it was in the machine, but is no longer there.



When I work with the resource DC04 I see this:

Resource Type-model Status

DC04 5702-001 Not detected

TAP03 3580-003 Not detected



Looking at resource detail for DC04 reveals:

Resource name . . . . . . . : DC04

Text . . . . . . . . . . . . : Storage Controller

Type-model . . . . . . . . . : 5702-001

Serial number . . . . . . . : 28-6096024

Part number . . . . . . . . : 0000097P6513



Physical location:

Frame ID 1

Card position C02

Logical address:

PCI bus:

System bus 1

System board 0

System card 21

Storage:

I/O adapter 7



Resource detail for TAP03 shows:

Resource name . . . . . . . : TAP03

Text . . . . . . . . . . . . : Tape Unit

Type-model . . . . . . . . . : 3580-003

Serial number . . . . . . . : 00-0336400

Part number . . . . . . . . :



Physical location:

Logical address:

PCI bus:

System bus 1

System board 0

System card 21

Storage:

I/O adapter 7

I/O bus 0

Controller 2

Device 0



Maybe that might help?





-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Wednesday, November 26, 2014 1:19 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Tape Drive not Detected



I was having the same thoughts as I was reading the original post, even going so far as to glance back at a spare 2749 on my credenza.



"IF" you managed to connect the cables up with a 2749, and I'm not sure there is a cable that would properly connect due to the ends being different, I'll bet Roberto is correct. Fried green tape drive unit.



Now there is a 5702 card that's not reporting in your config below and I'm guessing if you cabled it with the cables that came off the tape device on

the P5 box you might be OK. What we don't know is if those cards are not

reporting due to card placement with respect the controlling IOP or not.

The IOP would appear to be reporting in so I'll guess it's card placements that are the problem or you don't have another IOP to drive the tape controller and the base IOP is full.



--

Jim Oberholtzer

Chief Technical Architect

Agile Technology Architects





-----Original Message-----

From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Roberto José Etcheverry Romero

Sent: Wednesday, November 26, 2014 11:52 AM

To: Midrange Systems Technical Discussion

Subject: Re: Tape Drive not Detected



Just to start, you might have fried the LTO4 drive. The 2749 is an HVD controller not an LVD one. Mixing HVD with LVD never ends well... And wait, the 2749 does NOT have 2 ports, it's a single port HVD controller...

weird...

You need either a 5702 or 571A controller to drive the LTO4, of course you have to hang that IOA under an IOP for LTO usage. Read the PCI/PCI-X placement rules redbook for locations and requirements on building a config for the 810.



Best Regards,



Roberto





On Wed, Nov 26, 2014 at 2:42 PM, Brian Piotrowski < bpiotrowski@xxxxxxxxxxxxxxx<mailto:bpiotrowski@xxxxxxxxxxxxxxx>> wrote:



Hi All,



I'm having an issue with connecting a tape drive to our iSeries box.

The box is a 9406-810 (yes, yes I know it's old, but I need to back it

up and restore it to the new server). The tape drive I have is a

3580-L43 single tape drive SCSI ID 0. The card I installed in the 810

is a 2749 which has two ports - SCSI ID 0, SCSI ID 1. I originally

removed this card from an

i520 box and installed it in slot C02 on the 810. I connected the LVD

cable from the LTO drive to SCSI PORT ID 1 on the interface card.

When I IPLed the system I would normally expect to see the tape drive

there when I do a WRKDEVD *TAP. However, there are no tape drives

present which would lead me to believe it might be misconfigured or I

am

missing something.



Anyone have any ideas where I should start? I went into SST and

looked under packaging resources and there are two tape units listed

there, but neither of them are the model that I have (they are listed

as 3580-003 and

3580-001 - checking the serial number on both shows neither of them

are the device I am trying to set up).



Looking into the failed and non-reporting logical hardware resources I

see these items:

Description Type-model Status Resource Name

Storage IOA ? 5702-001 Unknown DC04

Storage IOA ? 2749-001 Unknown DC03

Tape Unit ? 3580-003 Unknown TAP03

Tape Unit ? 3580-001 Unknown TAP04



I'm a bit stuck on how to proceed....what are my next steps to try and

get this resolved so I can get the LTO operational?



Thankee-sai!



/b;



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Brian Piotrowski

Manager - I.T.

Simcoe Parts Service, Inc.

Ph: 705-435-7814 x5995

Fx: 705-435-5029

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

http://www.simcoeparts.com<http://www.simcoeparts.com/<http://www.simcoeparts.com%3chttp:/www.simcoeparts.com/>>



Please consider the environment. Don't print this e-mail unless you

really need to.



The information contained in this communication is confidential and

intended only for the use of those to whom it is addressed. If you

have received this communication in error, please notify me by

telephone (collect if necessary) and delete or destroy any copies of it.

Thank you!



--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list To post a message email: MIDRANGE-L@xxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxx> To subscribe,

unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx<mailto:MIDRANGE-L-request@xxxxxxxxxxxx> Before posting, please take

a moment to review the archives at

http://archive.midrange.com/midrange-l.





--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxx> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx<mailto:MIDRANGE-L-request@xxxxxxxxxxxx> Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.





--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxx> To subscribe, unsubscribe, or change list options,

visit: http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx<mailto:MIDRANGE-L-request@xxxxxxxxxxxx> Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.





-----

No virus found in this message.

Checked by AVG - www.avg.com<http://www.avg.com>

Version: 2015.0.5577 / Virus Database: 4223/8629 - Release Date: 11/25/14

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.