RE: Trying to IPL A 9407-515

Is there documentation on the web for how to remove the power supply?

thanks

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, November 04, 2014 8:55 AM
To: Midrange Systems Technical Discussion
Subject: Re: Trying to IPL A 9407-515

Sounds like you have a failing fan in the Power Supply perhaps. There are actually four or five fans in that model. Four if you have one PS and five if you have two PS installed.

They will certainly spin up to full bore for a few seconds while they are all being tested. If all three up top spin hard then it's likely the one in the Power Supply that's not going. That sucker is not easy to replace and a Power Supply is your best bet.

Certainly worth pulling the PS out and using some canned air to both clean up the dust and also see if it spins freely. Canned air should spin it easily once it gets turning.

Also do this test with the fans up top. Check that they spin freely and don't wobble. I just sold a fan to another on the list because he had one rattling more than spinning!

Let me know if you think you need a fan or PS.

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 11/4/2014 12:22 AM, Jack Tucky wrote:

Just tired that. All 3 spin up and make a crazy loud noise then
shutdown

On Nov 3, 2014, at 11:53 PM, Roberto José Etcheverry Romero <yggdrasil.raiker@xxxxxxxxx> wrote:

I would take the entire assembly off, verify each fan and then reseat
fans and assembly.
Good Luck

On Tue, Nov 4, 2014 at 1:46 AM, Jack Tucky <jacktucky@xxxxxxxxx> wrote:

We shipped this baby from LA to indiana so I could save the data off
and make what I want of it.

The trip was pretty bad, box was bashed up.

Getting an 11007630 during IPL. Google says a fan isn't running at
the right speed.

It's dark and late here and my wife is mad I'm making noise.
Tomorrow morning, would you just find all the fans and give them a spin?


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com