× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



So the drives are non-supported for the Power6? Typically the only
difference is the sector/block size. I have formatted 300GB back to 283GB
in the past and 146GB back to 139s or gone the other way.

On Wed, Oct 15, 2014 at 10:07 AM, <rob@xxxxxxxxx> wrote:

Won't work.
But I have some in here that is labeled pSeries disk (down to the labels
on the drives themselves)


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Kirk Goins <kirkgoins@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 10/15/2014 01:05 PM
Subject: Re: How to prepare disk on a Power 6 Suse Linux partition
for sale or lease return
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Since I ma and i guy...
Heck I would create an LPAR ( or use one already cfg'd ) and point those
and only those disks to that LPAR, boot/install LIC which will init the
loadsource then use DST to init the others.


On Wed, Oct 15, 2014 at 8:28 AM, <rob@xxxxxxxxx> wrote:

Again, I am not looking for a DOD rated wipe.

I am preparing my last Power 6 for lease return. I have all the IBM i
disk initialized. But I have some in here that is labeled pSeries disk
(down to the labels on the drives themselves). These were used by my
Suse
Linux lpar. SUSE Linux Enterprise Server 11 installation program
v3.3.91
(aka SLES 11).
I had a thread going at DeveloperWorks at



https://www.ibm.com/developerworks/community/forums/html/topic?id=8f6fff74-1be6-486f-8a21-f6ab5d790bcc

but something went haywire there and my posts are marked as spam now. I
suspect the words "for sale" in the subject line.

I did the following:
Used the HMC to set the partition profile settings to boot to SMS.
I also changed the partition properties boot keylock position to Manual.
Then I said to activate the profile, using the advanced button to ensure
that it was set to Manual and SMS. I also told it to open up a terminal
window or console session.

At this menu:
Version EL350_149
SMS 1.7 (c) Copyright IBM Corp. 2000,2008 All rights reserved.



-------------------------------------------------------------------------------

Main Menu
1. Select Language
2. Setup Remote IPL (Initial Program Load)
3. Change SCSI Settings
4. Select Console
5. Select Boot Options
I took
5. Select Boot Options

At this menu:
Multiboot
1. Select Install/Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <OFF>
4. SAN Zoning Support
I took
1. Select Install/Boot Device

At this menu:
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
I took
7. List all Devices

When presented with these choices:
Select Device
Device Current Device
Number Position Name
1. 1 SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
2. 2 SCSI 1463 GB Harddisk
( loc=U0595.001.13230A8-CB1-C01-T5-L0-L0 )
I selected the first, the SCSI CD-ROM.

From this menu:
Select Task
SCSI CD-ROM
( loc=U0588.001.012EF8C-CB1-C14-T1-L1-L0 )
1. Information
2. Normal Mode Boot
3. Service Mode Boot
I selected:
3. Service Mode Boot

When presented with:
Are you sure you want to exit System Management Services?
1. Yes
2. No
I selected
1. Yes

When presented with:
Welcome to SuSE Linux Enterprise 11!
Type "install" to start the YaST installer on this CD/DVD
Type "slp" to start the YaST install via network
Type "rescue" to start the rescue system on this CD/DVD
Welcome to yaboot version r22.8-r1190.SuSE
booted from

'/pci@800000020000120/pci@2,4/pci1069,b166@1/scsi@0/sd@1,0:1,\suseboot\ya
boot.ibm'
running with firmware 'IBM,EL350_149' on model 'IBM,8203-E4A', serial
'IBM,0210813C5'
, partition 'deletemeLinux'
Enter "help" to get some basic usage information
boot:
In entered in rescue.

After quite some time I was given this menu:
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot

Last time I tried 3) Expert. I could use ls to list files and whatnot.
However I couldn't use fdisk as it kept telling me it wasn't found.
Tried
changing into various directories but I couldn't find it.

Any suggestions?


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.