|
Larry,--
Ping was good.
ping pencor05
Verifying connection to host system PENCOR05 at address 172.16.23.5.
PING reply 1 from 172.16.23.5 took 0 ms. 256 bytes. TTL 64.
PING reply 2 from 172.16.23.5 took 0 ms. 256 bytes. TTL 64.
PING reply 3 from 172.16.23.5 took 0 ms. 256 bytes. TTL 64.
PING reply 4 from 172.16.23.5 took 0 ms. 256 bytes. TTL 64.
PING reply 5 from 172.16.23.5 took 0 ms. 256 bytes. TTL 64.
Round-trip (in milliseconds) min/avg/max = 0/0/0.
Connection verification statistics: 5 of 5 successful (100 %).
User/passwords equal on both.
EIM - I did set up a EIM test using this profile years back, but
currently not used
CPF - Network Authentication Service error X'00070000' occurred.
Message ID . . . . . . : CPD3E3F Severity . . . . . . . : 10
Message type . . . . . : Diagnostic
Date sent . . . . . . : 04/08/14 Time sent . . . . . . : 14:50:01
Message . . . . : Network Authentication Service error X'00070000' occurred.
Cause . . . . . : Major status code X'00070000' and minor status code
X'96C73A8D' were received while processing the gss_init_sec_context function
for a Network Authentication Service operation. The following are common
major status code errors:
Enterprise Identity Mapping (EIM) association does not exist.
-- Major status code X'00000007' = User profile to Kerberos
principal association is not defined by Enterprise Identity Mapping (EIM).
-- Major status code X'00070000' = No credentials available in the
keytab file or user credential cache.
WRKLNK - displays entire Pencor05 IFS from Pencor06.
Firewall - yes, but not between LPARS.
I have DNS configured to use the internal VLAN between LPARS, so not going out and back in.
Paul
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, April 08, 2014 3:11 PM
To: Midrange Systems Technical Discussion
Subject: Re: Moving IFS objects from one LPAR to another
So the PING worked and the IP address is correct?
Are your user ID and password the same on both servers?
Are you using EIM?
What's the CPF behind the Network Authentication Service Error?
Assuming WRKLNK '/QFileSvr.400/Pencor05/*' either fails or brings up nothing?
Any firewall between these Servers?
- Larry "DrFranken" Bolhuis
www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com
On 4/8/2014 3:08 PM, Steinmetz, Paul wrote:
*This message was transferred with a trial version of CommuniGate(r)--
Pro* Larry,
Smoke screen issues, can't see.
mkdir '/QFileSvr.400/Pencor05'
Directory created.
Network Authentication Service error X'00070000' occurred.
Network Authentication Service error X'00070000' occurred.
CPY OBJ('/JWALK/JWALKAPP/SWC8XXDev/BRCT.csh')
TODIR('/QFileSvr.400/Pencor0
5/JWALK/JWALKAPP/SWC8XX/BRCT.csh')
Object not found. Object is
/QFileSvr.400/Pencor05/JWALK/JWALKAPP/SWC8XX/BRCT.csh/BRCT.csh.
Paul
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, April 08, 2014 2:48 PM
To: Midrange Systems Technical Discussion
Subject: Re: Moving IFS objects from one LPAR to another
So ON PenCor06 do:
PING Pencor05
Once that returns the correct address do: (If it doesn't may need a
DNS change or Host Table Entry)
mkdir '/QFileSvr.400/Pencor05'
cpy '/JWALK/JWALKAPP/SWC8XXDev/BRC.csh'
'/QFileSvr.400/Pencor05/JWALK/JWALKAPP/SWC8XX/BRC.csh
See how much smoke you make.
Is file BRC.csh a big file? If over 2G, will be a problem.
- Larry "DrFranken" Bolhuis
www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com
On 4/8/2014 2:44 PM, Steinmetz, Paul wrote:
Larry,--
Ok on 1 and 2.
Not sure if /QFileSvr.400 will work.
Here's my specific task at hand.
From Pencor06 need to cpy /JWALK/JWALKAPP/SWC8XXDev/BRC.cshTo Pencor05 /JWALK/JWALKAPP/SWC8XX/BRC.csh
Paul
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, April 08, 2014 2:19 PM
To: Midrange Systems Technical Discussion
Subject: Re: Moving IFS objects from one LPAR to another
Paul meet /QFileSvr.400/ /QFileSvr.400/ meet Paul. :-)
All you need to make this work is:
1) same user and password on both Servers (LPAR)
2) the system name works when you PING servername
3) Create the directory servername under /QFileSvr.400/
Such as /QFileSvr.400/servername
Now you can use WRKLNK, or CPY or other IFS type commands to push or pull files between servers. Note that there is a 2G file size limit here.
- Larry "DrFranken" Bolhuis
www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com
On 4/8/2014 2:01 PM, Steinmetz, Paul wrote:
I need to move an IFS object from one LPAR to another, would like to include as part of a AJS scheduled job.--
I tried using SAVRST, but SAVRST only works if the path is exactly the same.
SAVRST also has many restrictions.
Is anyone aware of another command or tool for moving IFS objects across LPARS?
We currently use SAVRSTOBJ and SAVRSTLIB for our non-IFS objects, no issues here.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
