× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. February 2014

Re: HMC updates ?

We upgraded our 7043-CR4 to V7R780 with PTF MH01388 yesterday.

We burned .ISO DVDs from downloaded files.

The upgrade didn't work. IBM said we had a media issue. Maybe.

With help from IBM we we able to do an install of 7.7.80 from the same DVD. Go figure. It was like a scratch/reload of the HMC. There was some reconfiguring to do but it discovered the FSB of the two managed systems with no problem.

One big issue is that we learned that if you are on V7.7.80 you CANNOT have any other HMCs at a lower level due to an increase in the FSB on the IBMi.

Jerry



On 2/21/2014 2:35 AM, Jack Kingsley wrote:
Thank you much for the information.


On Thu, Feb 20, 2014 at 2:40 PM, Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx> wrote:

Rob,

I agree, and that's why I did not blindly suggest the upgrade to 7.7.8.

7.7.7 is the newest release that is currently on the web site compatibility
lists. You need a CR3 or C05 or later to get to 7.7.7.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Thursday, February 20, 2014 1:27 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC updates ?

Jack,

Maybe this doesn't apply to you but others should keep in mind that some of
the older HMC's won't run the latest and greatest HMC code. Like ours.
(upgrade planned).
Also, you should ensure that your level of firmware is compatible with your
HMC code.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Jack Kingsley <iseriesflorida@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 02/20/2014 01:36 PM
Subject: Re: HMC updates ?
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Thank you.


On Thu, Feb 20, 2014 at 12:16 PM, Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx> wrote:

Jack,

As Jerry points out 7.7.8 is out, but to answer your question; yes just
put
on the SP3. I don't remember if the eFix is part of that or not. You
can
always try to load it. If it's there it will tell you.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jerry Draper
Sent: Thursday, February 20, 2014 11:04 AM
To: Midrange Systems Technical Discussion
Subject: Re: HMC updates ?

v7.7.8 is available.

Jerry

On 2/20/2014 5:19 AM, Jack Kingsley wrote:
I have 7.7.4 and need to get current on Service Packs. I notice there
is a current SP3 and an EFIX, do I need to do all the SP's or can I
just get the current SP3, then put on the EFIX.


--
Jerome Draper, Trilobyte Software Systems, since 1976 iSeries, Network,
and
Connectivity Specialists -- iSeries, LAN/WAN/VPN Representing WinTronix,
Synapse, Netopia, HiT, and others .....
(415) 457-3431; www.trilosoft.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.