× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. January 2014

Re: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110

Can you send output of DSPLIND on the original virtual line on the host?

Yes the manual install will only install the LIC and base O/S. Once that is installed then create the network based virtual optical drive and complete the install from option 11 (selective) or option 1 (everything) from go LICPGM.

Note that you have all the 'hard parts' done for this network based virtual optical you merely need to do the CRTDEVOPT piece and vary it on.


- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 1/3/2014 11:37 AM, Steinmetz, Paul wrote:

Network install of V7R1 Client Partition using DSLO image partially successful.

For the network install to initiate, I had to create 2 new virtual line descriptions, 2 interfaces, 2 new ip, using a different virtual adapter, VLAN 2.
I'm not sure why my primary virtual Ethernet would not work?
Any thoughts?

Pencor06 - Partition that holds the image catalog.
ETHVIRTHMC
172.15.23.6 255.255.255.0 ETHVIRTHMC *ELAN

Pencor07 - Hosted partition
ETHVIRTHMC
172.15.23.7 255.255.255.0 ETHVIRTHMC *ELAN

chsysstate -o on -k manual -m Server-8205-E6C-SN105815R -n Pencor08 DSLO -i d -f Pencor08 DSLO -r lpar --ip 172.15.23.8 --netmask 255.255.255.0 --gateway 172.15.23.6 --serverip 172.15.23.6 --serverdir /V7R1OSPTF --duplex auto --mtu 1500

LIC installed ok.
V7R1 base OS installed.

5770SS1 *BACKLEVEL Library QGPL
5770SS1 *BACKLEVEL Library QUSRSYS
5770SS1 *COMPATIBLE IBM

Why did all of i5/OS not install?
Was this because the chsysstate was manual?
Could this work with chsystate set as auto?

At this point, I believe I need to create a remote virtual optical.
Then 1. Install all


-----Original Message-----
From: Steinmetz, Paul
Sent: Wednesday, January 01, 2014 7:58 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110

HMC network install of client partition, keep getting this error message.
HSCL146A The I/O adapter: null is not valid.

-----Original Message-----
From: Steinmetz, Paul
Sent: Monday, December 30, 2013 2:41 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110

Jim,

Space in the LPAR name is fine, confirmed that this works.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, December 30, 2013 12:46 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110

Are you sure the "Pencor08 DSLO" is correct? I'm guessing the HMC command parser sees that space in the name between the 8 and the D and interprets the name incorrectly.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Monday, December 30, 2013 11:10 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110


Larry,

Pencor08 DSLO does not have a physical Ethernet, only virtual. The 10.5.23.8 does not exist, error on my part.
Pencor07 (10.5.23.7) is the host for the Pencor08 client.
Pencor06 (10.5.23.6) is the location for the DSLO image.

On Pencor07 host, I created the Ethernet bridge, per Pete's instructions.
Is this bridge needed for the network install or do I simply need a virtual Ethernet on Pencor08 client.

For the chsystate, can the IPs be a mixture (option 1) of actual Ethernet and virtual, or do they need to be all virtual (option 2).

Option 1
chsysstate -o on -k manual -m Server-8205-E6C-SN105815R -n Pencor08 DSLO -i d -f Pencor08 DSLO -r lpar --ip 172.16.23.8 --netmask 255.255.255.0 --gateway 10.5.23.6 --serverip 10.5.23.6 --serverdir /V7R1OSPTF --duplex auto --mtu 1500

Option 2
chsysstate -o on -k manual -m Server-8205-E6C-SN105815R -n Pencor08 DSLO -i d -f Pencor08 DSLO -r lpar --ip 172.16.23.8 --netmask 255.255.255.0 --gateway 172.16.23.6 --serverip 172.16.23.6 --serverdir /V7R1OSPTF --duplex auto --mtu 1500




-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Monday, December 30, 2013 9:05 AM
To: Midrange Systems Technical Discussion
Subject: Re: HMC network install of i5OS V7R1 from DSLO image, can't fine load source B2003110

Tagged I/O needs to be the Ethernet card that (in your case) gets the IP 10.5.23.8. Then the IP address 10.5.23.6 needs to be on that same network.
Now they CAN be virtual IP adapters that's legal but of course you'd probably want the 10.5.23.6 adapter to also be virtual on the same server.
It will work across an IBM i network bridge or VIOS SEA (which actually is a
bridge) but it's simpler with two virtual LAN adapters.

Not sure if it's fixed but in earlier V7 HMC code you could not tag the virtual Ethernet while running through the create partition wizard. You have to 'lie' to complete it then go back into the profile and tag the Virtual Ethernet as it allows it then.

The real deal is that it doesn't make any difference if this is a client partition to IBM i, client to VIOS, NPIV connected, vSCSI connected etc etc.
You are simply using this support for the alt-IPL source it doesn't care about where the IBM i will find it's storage in the end.

I have done a bunch of these this way and it works very well.

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 12/30/2013 2:10 AM, Steinmetz, Paul wrote:

Larry,

How should the tagged IO be configured for network install for client
partition?

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Monday, December 30, 2013 1:57 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC network install of i5OS V7R1 from DSLO image, can't
fine load source B2003110

Larry,

Thanks for all the help and tips.

I had two issues,
1) alt restart device wasn't tagged.
2) chsysstate - 1 extra space after serverdir/ V7R1OSPTF

Now that I have the setup and syntax correct, chsystate was successful.
I'm now trying to the same to a hosted client partition, error
B2004158
This is my first attempt of this for a client partition, not sure if this is possible?
I followed Pete Massiello PDF "Building Virtual IBM i partitions on
hosted
IBM i."
However, instead of loading from actual medial, trying a network install.
Is this possible?
The client doesn't have an actual Ethernet, so no actual IP.

chsysstate -o on -k manual -m Server-8205-E6C-SN105815R -n
Pencor08 DSLO -i d -f Pencor08 DSLO -r lpar --ip 10.5.23.8 --netmask
255.255.255.0 --gateway 10.5.23.6 --serverip 10.5.23.6 --serverdir
/V7R1OSPTF --duplex auto --mtu 1500



-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Sunday, December 29, 2013 8:31 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC network install of i5OS V7R1 from DSLO image, can't
fine load source B2003110

Paul,

Did the email client or the list remove characters after Pencor07?
Otherwise you have too many parameters there. Also it appears there is
an
extra space after the / in / OSV7.... Again could be an email client
thing.

Can you confirm that the line description used for the NFS Host is
configured for 1500 byte or smaller frames?

Can you confirm that the NFS and TFTP servers are in fact running on
the Host.

Finally can you confirm that profile "Pencor07(some missing
character)Upgrade" has the appropriate Ethernet line tagged as the Alternate Restart Device?

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 12/29/2013 6:16 PM, Steinmetz, Paul wrote:

HMC network install of i5OS V7R1 from DSLO image, can't fine load
source B2003110

Successfully completed similar process earlier this year.
Since HMC and LPAR both updated.
Redid prereqs several times.
I don't think the HMC is detecting the image catalog, mounted and
ready .

VFYIMGCLG IMGCLG(V7R1DLSO) TYPE(*UPGRADE) NFSSHR(*YES)

CHGAUT OBJ('/V7R1OSPTF') USER(*PUBLIC) DTAAUT(*RX) SUBTREE(*ALL)
CHGAUT OBJ('/V7R1OSPTF/BOOTP') USER(QTFTP) DTAAUT(*RX) SUBTREE(*ALL)
CHGTFTPA ALTSRCDIR('/V7R1OSPTF/BOOTP')

ENDTCPSVR SERVER(*TFTP)

STRTCPSVR SERVER(*TFTP)
STRNFSSVR SERVER(*ALL)
CHGNFSEXP OPTIONS('-i -o ro') DIR('/V7R1OSPTF')

chsysstate -o on -k manual -m Server-8205-E6C-SN105815R -n Pencor07
Upgrade -i d -f Pencor07 Upgrade -r lpar --ip 10.5.23.7 --netmask
255.255.255.0 --gateway 10.5.23.6 --serverip 10.5.23.6 --serverdir /
V7R1OSPTF --duplex auto --mtu 1500

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/



Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a
moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a
moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.


As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.