× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Do I need to do something to disable non-TCP/IP protocols? As I noticed
this in the help for LINESPEED
Note: The values 1G and 10G specify gigabit
Ethernet. Gigabit Ethernet is only available when
running strictly TCP/IP protocol.

And as mentioned, I know SNA was used originally.

Thanks!
Charles



On Wed, Jan 1, 2014 at 8:55 AM, Tim Bronski <tim.bronski@xxxxxxxxx> wrote:

Hi Roberto,

I think you meant CHGTCPA.

Tim
On 1/1/2014 7:46 AM, Roberto José Etcheverry Romero wrote:
To change the line you must vary off first which means... Do it from the
console and schedule the down time.
Also, you can issue a CHGNETA command and change the default buffer size
for tcp transactions to 32 or 64k (search the list for the preffered
value,
i dont remember right now).
Other than that, i've never had to change anything else


On Tue, Dec 31, 2013 at 5:56 PM, Charles Wilt <charles.wilt@xxxxxxxxx
wrote:

Was wondering why my FTP transfers to the i were so slow..

Took a look at the lind:
Ethernet standard . . . . . . . . : *ALL
Line speed . . . . . . . . . . . . : 10M
Current line speed . . . . . . . . : 10M
Duplex . . . . . . . . . . . . . . : *HALF
Current duplex . . . . . . . . . . : *HALF

Ok well, that explains it :)

I know those settings came from...our original 9402-400 was originally
plugged into a 10M hub and we our original client access used APPN/APPC
comms via the NSROUTER program.

But nowadays we're on a 9407-515 with a 5706 1G card plug into a 1G
switch
doing strictly ethernet comms.

Sure I could easily CHGLINETH DUPLEX(*AUTO) LINESPEED(*AUTO)...but I'm
guessing there's some more that needs to be updated and or removed.

So I'm wondering if anybody has a well practiced set of commands to
update
old ethernet settings.

Thanks!
Charles
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



--
Need secure FTP? Download your native sFTP solution here:
www.arpeggiosoftware.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.