Re: Tape Drive Needs to Be Cleaned

A few years ago, I read an article about drives and errors in a pc. It was
enlightening. The controller in a pc is smart enough to do multiple
retries all by itself. And, after a certain number of retries, the drive
is instructed to do an aggressive read. Just means that amplification is
ramped up. Sad thing about that is that DOS and Windows ignored the detail
from the controller that it did have issues, which it solved by itself.
Thus, we would eventually get the infamous Abort, Retry, Fail message.

I can't help but wonder if the i might be doing something similar.
PRTERRLOG shows temporary read and write errors. But, are those soft
errors only getting reported when the drive itself has finally given up and
then the operating system is involved?

Also, I am wondering how good a tape cleaning cartridge is. It can clean
heads and anyplace the tape touches. But, what about other debris inside
the drive? Could drive be dirty and debris be moving around inside? Is
drive cleaning with a swab possible? Is that an IBM only thing? Our 3590
got cantankerous, so IBM was called. Despite regular running of the
cleaning tape, it had issues. In this case, for whatever reason, all that
seemed was done was drive itself was powered down for a minute. On power
up, it ran full diagnostics. May have done other things like some manner
of recalibration. No errors were reported and drive works fine again. I
can't recall if IBM did any cleaning on it.

John McKee


On Thu, Nov 7, 2013 at 7:34 AM, Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx

wrote:

Get new tapes!!!! They are leaving bits and pieces of themselves
behind. The report only records when a tape unit actually reported a
fault in read or write, not if it's disintegrating.

The other option is the tape device itself is getting so the read/write
heads are out of alignment. Only solution there is to swap the tape
unit out. Being a model 250 I'm guessing it's not under maintenance.
You need to call Larry/Pete to virtualize that box and be done with it.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 11/7/2013 7:20 AM, Jerry C. Adams wrote:

My former employer, now client, has a Model 250 with an internal tape

drive

(6382 Model 001). Typically it needs to be cleaned every one to two

months.

Lately the system started issuing the message (CPF6792) every week. This
week it has issued the message every day, despite the fact that,

according

to the bookkeeper, the cleaning cartridge has been inserted and run every
morning.



The nightly backup seems to be running successfully, and I run the

PRTERRLOG

(Volume Statistics) every weekend, which has not indicated that any tape
needs to be replaced.



So, any idea, clue, or suggestion why the system (V5R1, if important)

tells

us that the drive needs to be cleaned?



Another thing, which I have always wondered: How does the system know

that

the drive needs to be cleaned? The answer may offer a clue to the

original

problem.



Thanks.



Jerry C. Adams

IBM i Programmer/Analyst

I always figured the American public wanted a solemn ass for President,

so I

went along with them. -Calvin Coolidge

--

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.