Re: Issues IPL'ing 9406-179

Thanks Jack.
I managed to IPL from the CD and was able to get to DST
From there I analyzed the Disks and one had unreadable errors.
It did give me a Serial Number & Name.
Before I exit DST I have these option:

1) Save Load Source Disk Unit Data
2) Copy Load Source Disk Unit Data
3) Display/change Page Data
4) Analyze Disk Unit Surface (which is what I did)
5) Initialize & Format Disk
6) Reclaim IOP Cache Storage
7) Stop Device Parity Protection

Since I couldn't IPL without the CD - I'm assuming the bad disk is a
Load Disk

So before I exit - since I'm also assuming I had RAID

Is there anything I can do to prevent having to reload the system entirely
?

Thanks for any advice,
Anguis





On 9/17/2013 1:44 PM, Jack Kingsley wrote:

Rasu, maybe this reference will assist you.

http://comments.gmane.org/gmane.comp.hardware.ibm.midrange/182980


On Tue, Sep 17, 2013 at 1:37 PM, RASU<rasu@xxxxxxxxxxxxx> wrote:

Hello All,

I have a 9406-170 that was sitting idle for over 3 years.
Upon trying to restart - it IPL'd in manual mode.
After 3 IPL's it would no longer come up far enough for Terminal access.
Code 675A3200
System Time& Date were messed up when it did IPL fully so I replaced
both the Clock& Cache Batteries.
That fixed nothing.

I'm back to 675A3200 with display codes as follows:
Display Code
11-3 675A3200
12-3 00620117
13-3 00010100
14-3 000100FF
15-3 675A0002
16-3 00000000
17-3 00000000
18-3 00000000
19-3 04440000

I purchased some spare disks just in case.
I also have the V5R1 CD's.

ANY advice appreciated as I am currently dead in the water.

Thanks,
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.