That works very nicely.
Paul Nelson
Cell 708-670-6978
Office 512-392-2577
nelsonp@xxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Roger Harman
Sent: Wednesday, August 07, 2013 3:12 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: QNTC: Is there an issue when Windows Id is different from
theAS400 User Id?
Another option is available since you are using SEQUEL.
At my previous employer, I used the FTP option of the EXECUTE statement to
send my output to a Windows server. I used BulletProof FTP Server on the
Windows box but the built-in would probably be fine too.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Vidal, Peter
Sent: Wednesday, August 07, 2013 9:18 AM
To: Midrange Topics (midrange-l@xxxxxxxxxxxx)
Subject: QNTC: Is there an issue when Windows Id is different from the AS400
User Id?
Good afternoon list!
Operating system: V5R4
Third Party Prod: SEQUEL R9M6
Maybe this has been already resolved but is better to ask the crew...
During the development / testing process for a ticket, I have plans to use
the EXECUTE command (from SEQUEL) to export a file to a with shared network
folder. This is my main goal. However, we need to enable an IBM/Microsoft
function. It is QNTC, if I am not mistaken.
Here is a link that discusses QNTC in more detail:
http://www.itjungle.com/fhg/fhg031704-story04.html
In the article it says: "QNTC is shipped as part of the base OS/400
operating system, but you must have the TCP/IP Connectivity Utilities for
iSeries 400 licensed program 5769TC1 or 5722TC1 installed and configured in
order to use it. You also need a working AS/400 NetServer configuration on
your iSeries or AS/400 box, which is configured through a later version
Client Access Express for Windows or iSeries Access for Windows Operations
Navigator. On the Windows side, you generally need a working Microsoft
Windows Internet Name Service (WINS) server in order to locate other Windows
servers on the network. Once that QNTC service is active and available,
then you can use the EXECUTE command in SEQUEL to save results to the remote
location."
I investigated and found out that:
Licensed Program 5769TC1 5722TC1
OHS7 Not Found Found
NOVA Not Found Found
OHS1 Not Found Found
Seems like we have a good opportunity to use this parameter of the EXECUTE
command then. Now, apparently there is a problem in that the Windows user
id and the AS400 user id must be the same so it is not ideal for user
initiated options.
Is this a true statement or is there anything that may have changed since
V5R4? How we can overcome this?
Thanks in advance,
Peter Vidal
________________________________
This communication is intended only for the use of the individual or entity
named as the addressee. It may contain information which is privileged
and/or confidential under applicable law. If you are not the intended
recipient or such recipient's employee or agent, you are hereby notified
that any dissemination, copy or disclosure of this communication is strictly
prohibited. If you have received this communication in error, please
immediately notify CareCentrix Compliance Hot Line at (877) 848-8229 and
notify the sender by electronic mail. Please expunge this communication
without making any copies. Thank you for your cooperation.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
