RE: Single user input inhibitted on all seesions to same LPAR for 5 to 10 minutes

Good thought.

Also, forgot to mention that the user was not directly connected to the LPAR B, but was passed through, STRPASTHR.

I did find what might be a common denominator, not sure if related.
At 12 noon, from a scheduled job, LPAR A does several (50 to 100) SAVRSTOBJ from LPAR A to LPAR B.
These normally take a few seconds per object, longer if any locks.
Today, the first object took 5 minutes, then was successful.
I'm thinking some issue that connects the LPARS, maybe QSNADS, or something else.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bryan Dietz
Sent: Monday, July 22, 2013 3:33 PM
To: Midrange Systems Technical Discussion
Subject: Re: Single user input inhibitted on all seesions to same LPAR for 5 to 10 minutes

look for network problems. bad switch port, nic card on the PC,
cable(s) etc.





Bryan

Steinmetz, Paul said the following on Mon, 7/22/2013 3:24 PM:

I had a single user (my manager / programmer) go input inhibited for 5 to 10 minutes, on all sessions.
LPAR was fine, I and others working fine.
Nothing in her joblogs, PAL, SAL, LIC log
Using MPG, I checked for locks, seizes, etc, I couldn't find anything.

Suggestions on where else to look or reasons for input inhibited culprit.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
471 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/