Re: NetServer password failure

Check this document.
We had same issues, mixed case an lan manger settings
http://www-01.ibm.com/support/docview.wss?uid=nas15197341657f9f57e86257655005736ff

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Michael Naughton
Sent: Friday, May 10, 2013 4:30 PM
To: Midrange Systems Technical Discussion
Cc: midrange-l@xxxxxxxxxxxx
Subject: Re: NetServer password failure

We're at QPWDLVL=0, and we've had problems with users using "special" characters in passwords, as well as users mixing upper and lower case -- all of a sudden they can't get to the network drives. Is it possible to change the user's password to, say, all lower case, with just numbers and letters, and see if that fixes the problem? If it does, that might be your issue ....


Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx> writes:

IBM i 7.1.

Set up a new user. She chose a password with an '@' in it. Signed on
to TN5250 without issues (as expected). Tried to map a network drive
(Windows 7) to /Accounting and she got 'Access denied'. No CPInnnn
message, just line of text inside the Windows 'Map a Network Drive' box.
After changing her password to match her user ID, she was able to map
the network drive fine; knew at that point it wasn't authorisation but
her password. Windows 7 says that an @ is acceptable in a password.
http://windows.microsoft.com/en-US/windows7/tips-for-creating-strong-pa
sswords-and-passphrases

Infocenter (Networking -> TCP/IP applications -> NetServer) says this:
'When using i5/OS NetServer, normal i5/OS user profiles and passwords
apply. By default, only users with valid i5/OS user profiles and
passwords can access resources on the system. Windows 2000, Windows XP,
and Windows Server 2003 offer the option to select a different user ID.
If the passwords do not match, you will see a password window. Windows
can optionally be set to remember the password.'

So. She can sign on to green screen with the @ in her password, but
she can't sign on to NetServer with it, despite the assertion in the
above quoted paragraph. The IBM reference material on NetServer seems...
thin. Is there a good technical reference I can use?
--buck