Re: iSeries Operations Console

[Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx>]

John,

The 10.50.1.12 is the address the LAN console software connects to for 
the system. I should be different than your PC.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

On 4/2/13 10:22 AM, John McKee wrote:
> I think I found it.  I am looking at a screen titled Configure Service
> Tools LAN Adapter
>
> Internet address is 10.50.1.12
>
> WShich confuses me, as pc has IP of 10.50.1.120
>
> Subnet mask on the display is 255.255.255.0
>
> John McKee
>
> On Tue, Apr 2, 2013 at 10:10 AM, Jack Kingsley<iseriesflorida@xxxxxxxxx>  wrote:
> > >In SST.
> > >
> > >
> > >On Tue, Apr 2, 2013 at 11:08 AM, John McKee<jmmckee@xxxxxxxxxxxxxx>  wrote:
> > >
> > > >>>From the pc that >has< functioned as the console, I can ping the i.
> > > >>Can also ping the pc from the i.  Can also ping the console pc from my
> > > >>pc.
> > > >>
> > > >>System value QCONSOLE is DSP04.  That device is VARY ON PENDING.
> > > >>
> > > >>Where is lan console IP address stored?
> > > >>
> > > >>John McKee
> > > >>
> > > >>On Tue, Apr 2, 2013 at 9:53 AM, Jack Kingsley<iseriesflorida@xxxxxxxxx>
> > > >>wrote:
> > > > >> >Can you ping the adapter IP address that you have set for lan console.
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> >On Tue, Apr 2, 2013 at 10:47 AM, John McKee<jmmckee@xxxxxxxxxxxxxx>
> > > >>wrote:
> > > > >> >
> > > > > >> >>Boss gave me screen shots and instructions for getting the console
> > > > > >> >>started.  It won't work.  Hasn't for a couple of weeks.
> > > > > >> >>
> > > > > >> >>Click on "connect" and nothing seems to happen.
> > > > > >> >>
> > > > > >> >>Simple question to start:
> > > > > >> >>
> > > > > >> >>What is device that is used?  Makes me think something is varied off.
> > > > > >> >>
> > > > > >> >>John McKee
> > > > > >> >>--