Yes, I believe on your model 800, the preferred slot was C07 for the console. But as you say, 65+21 will be your friend.
Pete
--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rene K.
Sent: Friday, March 01, 2013 4:23 AM
To: Midrange Systems Technical Discussion
Subject: Re: How to perform a clean V5R4 install?
Hi Pete,
thanks for the confirmation. ATM i've set up a W2k PC with Operations Console via a direct serial connection, i assume that booting the LIC or OS CD will auto-detect and use the console as long as i've configured the serial connection via the 65+21 function?
Can't wait to get this baby running! :)
Regards,
Rene.
________________________________
From: Pete Massiello - ML <pmassiello-ml@xxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Sent: Thursday, February 28, 2013 3:16 PM
Subject: RE: How to perform a clean V5R4 install?
That is perfect. D-Mode Manual IPL from the I_BASE_01 CD, which will load and initialize the system, then IPL from that on the A side. You will come back up to DST, where you want to setup Raid, and then add your other disks to the ASP. Then load the operating system. When that is done, you will be presented a regular menu, where you do a GO LICPGM, and install all the license programs you want. Put your keys in, load your PTFs and you are almost done. Get a full system backup for recovery, and now you are done.
Pete
--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rene K.
Sent: Thursday, February 28, 2013 6:13 AM
To: midrange-l@xxxxxxxxxxxx
Subject: How to perform a clean V5R4 install?
Hi All,
it took me some time, but finally i was able to secure the license keys that were installed on my system. I also obtained the V5R4 media set (CDs).
Now i'm ready to perform a new, crisp installation of my machine.
I've looked around, but didn't find a conclusive answer how i should perform this action.
What i want to do is perform a new install of the LIC and OS.
It looks like i have to IPL in Manual mode type D, boot from the CD (I_BASE_01_i5_xxxxx) to install the V5R4M5 LIC, restart the machine, and from there use the B29xx_01 media while performing an IPL type A in Manual mode.
Is this correct?
Machine is a 9406-800, software to install is, as mentioned, V5R4M5.
Thanks in advance,
Rene.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
