NFS: EXPORTFS options

[rob@xxxxxxxxx]

What am I doing wrong?  I am trying to export a directory so that 
specified systems and have RW access to it.

EXPORTFS OPTIONS('-F -O RW=GDIHQ:GDIHQ1:GDIHQ2 ACCESS=GDIHQ:GDIHQ
1:GDIHQ2') DIR('/rob') 
Cannot find an address for the specified system name. 
Export request for entry /rob failed. 
0 entries exported, 1 entries not exported. 


Message ID . . . . . . :   CPFA1CE       Severity . . . . . . . :   40  
Message type . . . . . :   Diagnostic  
Date sent  . . . . . . :   02/01/13      Time sent  . . . . . . : 09:51:31
  
Message . . . . :   Cannot find an address for the specified system name.  

Cause . . . . . :   An error was detected while attempting to retrieve  
  communication information about the host ACCESS=GDIHQ. 
Recovery  . . . :   Verify the host name to assure it was entered 
correctly.
  Or, refer to the getaddrinfo() API in the Socket programming topic  
  collection in the Programming category in the IBM i Information Center 
for
  more information about recovery actions for this problem.  


ping gdihq 
Verifying connection to host system GDIHQ.dekko-1 at address 10.17.6.33.
PING reply 1 from 10.17.6.33 took 3 ms. 256 bytes. TTL 64. 
PING reply 2 from 10.17.6.33 took 0 ms. 256 bytes. TTL 64. 
PING reply 3 from 10.17.6.33 took 0 ms. 256 bytes. TTL 64. 
PING reply 4 from 10.17.6.33 took 0 ms. 256 bytes. TTL 64. 
PING reply 5 from 10.17.6.33 took 0 ms. 256 bytes. TTL 64. 
Round-trip (in milliseconds) min/avg/max = 0/0/3. 
Connection verification statistics: 5 of 5 successful (100 %). 

I also tried GDIHQ.dekko-1 and that failed with the same message.
EXPORTFS OPTIONS('-F -O RW=GDIHQ:GDIHQ1:GDIHQ2 ACCESS=GDIHQ.dekko-1:GDIHQ
1:GDIHQ2') DIR('/rob') 
Cause . . . . . :   An error was detected while attempting to retrieve
  communication information about the host ACCESS=GDIHQ.DEKKO-1. 



Rob Berendt