It looks similar to what we do but we specify a physical volume ID, not *MOUNTED, but that may just be our desire to use specific volumes. We specify COMPACT *YES in the command. We move the virtual volume from the ProtecTIER shelf to the ProtecTIER library and use WRKMLBBRM to locate the volumes and use option 6 to change their statuses but we don't do a MOVMEDBRM.
Paul Fenstermacher | Sys/NW Admin,Sr | Corporate Systems - POWER Systems Administration | Jack Henry & Associates, Inc.(r)
663 West Highway 60 | Monett, MO 65708 | Ph. 417.235.6652 | x177389 | pfenstermacher@xxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, January 29, 2013 9:15 AM
To: Midrange Systems Technical Discussion
Subject: RE: dupmedbrm
Am I doing something wrong on the command?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: Paul Fenstermacher <PFenstermacher@xxxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 01/29/2013 09:55 AM
Subject: RE: dupmedbrm
Sent by: midrange-l-bounces@xxxxxxxxxxxx
We do this all the time using ProtecTIER and BRMS networking. Save done
on Sys 1 to ProtecTIER device. ProtecTIER device replicates to ProtecTIER
device at remote location. We do DUPMEDBRM at remote site to physical
tape and BRMS networking sends data to systems where we've configured it
to be sent.
Paul Fenstermacher | Sys/NW Admin,Sr | Corporate Systems - POWER Systems
Administration | Jack Henry & Associates, Inc.(r)
663 West Highway 60 | Monett, MO 65708 | Ph. 417.235.6652 | x177389 |
pfenstermacher@xxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, January 29, 2013 7:45 AM
To: midrange-l@xxxxxxxxxxxx
Subject: dupmedbrm
I save to virtual tape using brms on one system. I ftp the the data to
another system. I can see it on the target system using DSPTAP specifying
the virtual tape device. I would like to dup this to physical media AND
have the information updated on the source system so that when I do the
WRKOBJBRM it will show me that it's also on this physical media.
Do I just now run
DUPMEDBRM VOL(*LIST)
FROMDEV(VRTDEV)
TODEV(TAPKVL01)
FROMVOL(VRT001 VRT002)
FROMSYS(APPN.SourceSystem)
TOVOL(*MOUNTED)
Do I have to do any MOVMEDBRM first?
Can I specify compaction at this time also?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual or entity to which it is addressed. The
message,
together with any attachment, may contain confidential and/or privileged
information.
Any unauthorized review, use, printing, saving, copying, disclosure or
distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.
midrange.com
