Re: HMAC Calculation

BINGO GRINGO
Sorry about that - the exuberance just gushes out.
That worked - well at least no errors.
MUCH, MUCH, MUCH appreciated.
Trying to work on this was SOOOOO depressing

Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Tim Bronski
Sent: Thursday, January 17, 2013 3:26 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMAC Calculation

SecretSharedKey

We can take this offline if you'd prefer...

On 1/17/2013 8:57 PM, Alan Shore wrote:

Thanks for your reply Tim
This is just sending me up the wall
When you said that the " key is too short for the algorithm specified. It needs to be 20 bytes long for sha1."
Which field are you talking about?


Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Tim Bronski
Sent: Thursday, January 17, 2013 11:42 AM
To: Midrange Systems Technical Discussion
Subject: Re: HMAC Calculation

I'm not that familiar with this api (but I know a bit about hmacs). Your key is too short for the algorithm specified. It needs to be 20 bytes long for sha1.

On 1/17/2013 4:37 PM, Alan Shore wrote:

Hi everyone
I am hoping someone will take pity
I have looked at this web page
http://www.iprodeveloper.com/forums/aft/134541
Where Scott Klement is answering someone's question in utilizing the
api Qc3CalculateHMAC I have written a simple program to try and get
the code working (and failing miserably) Here is the code The error
that happens (from the joblog) is The key string length is not valid.
Once I have this working, I need to utilize SHA-256 instead of SHA-1
As always any and all help is gratefully accepted.

km003H Bnddir('TOOLBIND': 'MFGBIND')
H dftactgrp(*no) actgrp('QILE')
H option(*srcstmt:*nodebugio)
? * PROGRAM STATUS DATA STRUCTURE
? /copy copybook,psds
?
? ** PROTOTYPES
**** Prototype definitions using source file QSRVSRC
?
? *---------------------------------------------------------------------
? * Stand Alone Fields - TOP
? *---------------------------------------------------------------------
d SecretSharedKey...
d s 4 inz('xxxx')
d binaryHMAC s 20a
d SHA_1 c const(2)
D DataLen s 10i 0
d dataToHash s 500a
? *---------------------------------------------------------------------
? * Stand Alone Fields - BOTTOM
? *---------------------------------------------------------------------
?
D ErrorCode DS qualified
D bytesProv 10i 0 inz(0)
D bytesAvail 10i 0 inz(0)

D WsErrorCode DS qualified
D bytesProv 10i 0 inz(0)
D bytesAvail 10i 0 inz(0)

D my_key DS qualified
D Type 10i 0 inz(SHA_1)
D Len 10i 0
D Fmt 1a inz('0')
D 3a
D Value 256a

D Qc3CalculateHMAC...
D pr extproc('Qc3CalculateHMAC')
D pinData 32767a const options(*varsize)
D pinDataLen 10i 0 const
D pinFormat 8a const
D palgDesc 10i 0 const
D palgDescFmt 8a const
D pkeyDesc 32767a const options(*varsize)
D pkeyDescFmt 8a const
D pcryptoProv 1a const
D pcryptoDev 10a const
D pHMAC 64a options(*varsize)
D pErrorCode 32767a options(*varsize)

? *****************************************************************
/free
//---------------------------------------------------------
// Calculate the SHA-1 HMAC hash
//---------------------------------------------------------

DataToHash = 'A1B2C3D4';
my_key.len = %size(SecretSharedKey);
my_key.value = SecretSharedKey;
DataLen = %size(DataToHash);
monitor;
Qc3CalculateHMAC( DataToHash
: DataLen
: 'DATA0100'
: SHA_1
: 'ALGD0500'
: my_key
: 'KEYD0200'
: '0'
: *blanks
: binaryHMAC
: ErrorCode );
on-error;
WsErrorCode = ErrorCode;
endmon;


? *inlr = '1';
return;
/end-free
Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill

-----Original Message-----
From: Alan Shore
Sent: Monday, January 14, 2013 5:49 PM
To: Midrange Systems Technical Discussion
Subject: RE: HMAC Calculation

How to use the API
Like I said previously, Scott had an example on the web, but I prefer a couple of examples.

Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Tim Bronski
Sent: Monday, January 14, 2013 5:47 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMAC Calculation

Alan, are you looking to understand what a HMAC is or how to use the API?

On 1/14/2013 7:13 PM, Alan Shore wrote:

As part of new web service transaction, I have to supply a "Hex
encoded HMAC required for client authentication and message
integrity checks" with a shared secret used as the key.

Googling HMAC AS/400. I came across the Qc3CalculateHMAC API, but
the only web page that I have found is
http://www.iprodeveloper.com/forums/aft/134541
Where Scott Klement is responding to someone's question.
Don't get me wrong, Scott has probably forgotten WAAAY more than I know.
It's just that I prefer a couple of choices for me to read and
hopefully understand If anyone can supply any more info, as always,
it would be gratefully appreciated


Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill


Disclaimer: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company.

--
Need secure FTP? Forget PASE...get your FREE sFTP here
www.arpeggiosoftware.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
Need secure FTP? Forget PASE...get your FREE sFTP here
www.arpeggiosoftware.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
Need secure FTP? Forget PASE...get your FREE sFTP here www.arpeggiosoftware.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.